Products in Exterior & Body: Polyurethanes (PU)

Millathane® 76M (Premilled) is a sulfur or peroxide curable polyester millable polyurethane rubber, used in many applications because of its excellent oil resistance, high damping characteristics and high strength and abrasion resistance properties.

Millathane® 76 is a sulfur or peroxide curable polyester millable polyurethane rubber, used in many applications because of its excellent oil resistance, high damping characteristics, and high strength and abrasion resistant properties.

RE-FLEX® 885AJL is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

AcuLite E45FH is a high performance light weight flexible material engineered to give excellent broad band sound absorption, with an emphasis on lower frequency performance.

Ebalta MG 707 / Z 400 is a 2-components polyurethane material, which is cured thermically and used for prototypes. The four mentioned formulations differ in being filled or non-filled and their mechanical properties. The B-components Z 400 (potlife 8-12 min.) and Z 460 (potlife 60-70 min.) are identical and can be mixed with each other to control the reactivity, e.g. potlife. These combinations of Z 400 and Z 460 comp. B can be made any way as long as the totally required quantity of comp. B is observed (for each system). The total amount of Z 400 and Z 460 always has to be 30 g for 100 g comp. A

Ebalta MG 703 / Z 400 is a 2-components polyurethane material, which is cured thermically and used for prototypes. The four mentioned formulations differ in being filled or non-filled and their mechanical properties. The B-components Z 400 (potlife 8-12 min.) and Z 460 (potlife 60-70 min.) are identical and can be mixed with each other to control the reactivity, e.g. potlife. These combinations of Z 400 and Z 460 comp. B can be made any way as long as the totally required quantity of comp. B is observed (for each system).

Foam Partner B 55 N is a polyester PUR foam which are versatile materials and useful for a variety of applications. The defining characteristics of our polyester PUR products include their impact-absorbing properties, excellent resistance to aging, and high compression load deflection.

AcuLite E45 is a high performance light weight flexible material engineered to give excellent broad band sound absorption.

RE-FLEX® 795AS is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

ebalta MG 425 is processed on a two-component low pressure device. The systems MG 400 / MG 425 / MG 475 are cured with the hardener PUR 19. By mixing MG 425 with MG 400 the E-modulus can variably between 630 – 1550 MPa. After grinding with a sand paper , grit 280, the surface can be varnished with a commercial lacquer. For better adhesion we recommend the use of a primer coat. Nitrocellulose lacquers have a better adhesion on polyurethane surfaces than on acryllacquer- systems. Release agent – please see category release agent

Essentium’s TPU 80A Low Friction is the lowest durometer filament in our broad flexible portfolio. Currently, it is the softest 3D printing material that can be printed on any open-source printer. It has excellent elongation at break and impact strength. This filament has a low friction surface that allows for easier feeding while printing.

RE-FLEX® 1588AJL is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

Dioshy TPU T960DM is a Thermoplastic Polyurethane with a soft segment compositions of a ester group with well processing abilities, tough and elastic which are suitble to abrasion resistance, oil resistance and can be used when high mechanical properties are needed.

AquaCast® Is a family of Urethane Elastomer two component Systems: Hardnesses from 10 Shore A to 85 Shore D available with Colorants, UV Inhibitors, Anti-Oxidants, and other additives variable gel times, variable working times.

AcuLite E20F is a high performance light weight flexible material engineered to give excellent broad band sound absorption.

Akuabrid HM 6552A has excellent hydrolysis resistance, excellent eub resistance, high surface hardness, good mechanical property and good solvent resistance.

Dioshy TPU T998M is a Thermoplastic Polyurethane with a soft segment compositions of a ester group with well processing abilities, tough and elastic which are suitble to abrasion resistance, oil resistance and can be used when high mechanical properties are needed.

LFT-G® TPU-NA-LGF20 is a Rigid Thermoplastic Polyurethane Polymer Matri with Long glass fiber type with 20% fiber Content in Natural color, and and custom colors.

Akuabrid HM 2124 has good hydrolysis resistance and good mechanical property.

AFT Fluorotec AF1008 U203-D57G is a hydrolysis resistant PU (H-PU) composed of prepolymers based on polyoxytetrametylene glycol (PTMEG) and diphenylmethane diisocyanate (MDI) processed liquid with catalysts and a MoS2 polyol. The hardness is adjusted at 57 +/-2 Shore D which makes it an excellent extrusion resistant material. This special MoS2 composition performs excellent in critical lubrication situations and reducing the stick-slip behavior.

Foam Partner B 25 N is a polyester PUR foam which are versatile materials and useful for a variety of applications. The defining characteristics of our polyester PUR products include their impact-absorbing properties, excellent resistance to aging, and high compression load deflection.

RE-FLEX® 1592AJL is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

INDUPHON® S/CK acoustic insulation consists of acoustically effective foams that are used in the construction of vehicles and machines to absorb airborne sound. Materials and surfaces define the acoustic absorption in different frequency ranges and also fulfill other requirements. INDUPHON® acoustic foam is a sound-absorbing material made of modified PUR foam. The selection of special foam and surface qualities allows adaptation of the ab- sorption behavior to a specific frequency range. Oil and water repellent, special colors on request.

RE-FLEX® 780AJLM is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

Dioshy TPU E990M is a Thermoplastic Polyurethane with a soft segment compositions of a ether group with well processing abilities, tough and elastic which are suitble to abrasion resistance, oil resistance and can be used when high mechanical properties are needed.

ALTON ES 400 is a water based dispersion of a selected aliphatic poliurethane, mainly developed to get a film able to offer adhesive properties at high temperature and at the same time, a dry touch at room temperature.

BigRep TPU is the material complies with the compositional requirements of the European Regulation on Plastic Food Contact Materials and with the requirements of LFGB.

ACP Composites Polyurethane Foam Core is a CFC-free, rigid, closed-cell, flame-retardant foam core and has a density of 6 pounds per cubic foot (PCF). It exhibits a high strength-to-weight ratio due to its cellular structure and cross-linked resin. Because of its closed-cell structure, Polyurethane Foam has great resistance to water absorption, and will not swell, crack, or split on exposure to water.

Foam Partner B 22 H is a polyester PUR foam which are versatile materials and useful for a variety of applications. The defining characteristics of our polyester PUR products include their impact-absorbing properties, excellent resistance to aging, and high compression load deflection.

RE-FLEX® 580AXL is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

Z-SEMIFLEX is a material characterized by a minimal shrinkage level and resistance to greases and chemicals. It is based on TPU 98A which gives your models unique characteristics, including high elasticity and rubber-like properties. Z-SEMIFLEX also exhibits high impact strength which allows you to apply force to a 3D printed model with little risk of damage. These unparalleled qualities make Z-SEMIFLEX ideal not only for prototypes tested in adverse industrial environments, but also for models resembling organs used in medical assessment processes.

Foam Partner B 20 N/H is a polyester PUR foam which are versatile materials and useful for a variety of applications. The defining characteristics of our polyester PUR products include their impact-absorbing properties, excellent resistance to aging, and high compression load deflection.

Dioshy TPU T995NC is a Thermoplastic Polyurethane with a soft segment compositions of a ether group with well processing abilities, tough and elastic which are suitble to abrasion resistance, oil resistance and can be used when high mechanical properties are needed.

RE-FLEX® 790A is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

RE-FLEX® 470A is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

Poly 81-90 rubbers is to make firm molds, mold facings, stamping tools, industrial parts, rollers, gaskets, mold shells, bumpers or pads. Poly 81-90 rubbers consist of two liquid parts (A and B), which, after mixing, cure at room temperature to tough, durable rubbers. They offer low sensitivity to moisture, and low viscosity for easy mixing and pouring.