Products in Other Adhesives & Sealants Applications: Radiation Curab...

PL-7210 has a unique combination of high tensile strength and good elongation, which results in excellent toughness upon curing. PL-7210 is also very low color.

Bisomer® PEA6 is a hydroxyl functional methacrylate monomer.

PL-7130 is a low color urethane that is a viscous liquid at room temperature. Upon cure, PL-7130 creates a flexible yet tough polymer with percent elongation near 80%. PL-7130 is non-yellowing and can be used in formulations to add flexibility.

AKTIFIT VM is a SILFIT Z 91 coated with vinyl functional silane.

Bisomer® PPA6 is a hydroxyl functional acrylate monomer.

Designer Molecules U-835 is a urethane resin functionalized with an acrylate and a methacrylate. This low viscosity urethane makes it an ideal candidate for a base resin in an adhesive formulation. The urethane linkages help to form a very tough cross-linked film with excellent adhesion on a variety of substrates including metal, polyimide, silicon, and ceramic. The acrylate/methacrylates curable ends make it ideal for both thermal cure via peroxides or UV cure through photo initiators.

PHOTOMER® 4173 is a proprietary UV/EB curable acrylate oligomer of low functionality and low viscosity. Designed primarily for use in etch-resist inks for printed circuit board manufacture, it can be readily formulated into a UV curable screen ink which exhibits good scratch resistance and improved stripping characteristics.

CE CRYL 1000 is a 100% Epoxy Acrylate Oligomer.

CE CRYL DPGDA is a Dipropylene Glycol Diacrylate Monomer.

Spectra Group Limited H-Nu 640MP can cure a wide range of acrylate resins via free-radical mechanism. It is a commercial photoinitiator with a broad absorbance range of 570 nm to 670 nm (λmax = 649nm in DMSO).

PL-7113 is a non-yellowing urethane that exhibits a high degree of elongation. It also has a high rate of conversion with low average shrinkage stress. PL-7113 can be added to formulations to add toughness.

CE CRYL HDDA is a Hexane-diol Diacrylate Monomer.

bossin® W-33 has excellent properties in curing, fast, heat resistance, low shrinkage and low irritation.

ADDAPT PolySurF ACE is a solvent free polymerisable additive. It imparts benefits like: acid resistance, high gloss, excellent pigment wetting, water repellence, film appearance, UV stability and improved adhesion to thermoplastics. It is the Acrylic Acid adduct of the epoxy ester of Versatic Acid.

TIANCURE ITX is a highly efficient type Il photoinitiator when used in combination with amine synergists (aminobenzoate) to initiate radical photopolymerisation of unsaturated resins such as those based on a prepolymer - e.g. acrylates - in combination with mono- or multifunctional monomers as reactive thinners. It is also widely used as a very efficient sensitizer in combination with type I photoinitiators, absorbing at shorter wavelength, Like e.g. Photointiator 907

Bisomer® HPMA (Hydroxpropyl Methacrylate) is a hydroxyl functional methacrylate monomer.

Photomer® 4071 is a low viscosity and low odor diluent for UV and EB radiation curable varnishes and pigmented coatings like inks as well as for UV inkjet applications.

Bisomer® BZMA (Benzyl Methacrylate) is a low viscosity mono-functional monomer suitable for a wide range of applications.

PHOTOMER® 6010 is a proprietary, non-yellowing aliphatic urethane developed for radiation curable systems. This premium oligomer of low viscosity eliminates the need to melt the oligomer prior to use. An excellent film former, it exhibits excellent light stability and weatherability for outdoor applications and outstanding haze, scratch and abrasion resistance.

Bisomer® BDDMA (1,4 Butanediol Dimethacrylate) is a low viscosity, low odor dimethacrylate monomer.

Bisomer® HEMA (Hydroxyethyl Methacrylate) is a hydroxyl functional methacrylate monomer.

JRCure-1108 is yellow crystal in appearance.

PHOTOMER® 4050 is an aliphatic difunctional acrylate of low viscosity, low volatility, good flexibility and reactivity. It is an effective reactive diluent with good viscosity reducing and solvency characteristics for a wide range of radiation curable acrylated oligomers and prepolymers.

Bisomer® S20W is an aqueous solution of a long chain methacrylate monoester based on a polyethylene glycol backbone.

AKTISIL VM 56/89 is a SILLITIN Z 89 coated with Vinyl silane.

Bisomer® EP100DMA is the dimethacrylate ester of a specifically designed block polyalkylene glycol.

JRCure-1104 is white crystalline powder in appearance.

Designer Molecules BMI-5000 Toluene is an imide-extended bismaleimide oligomer that exhibits excellent toughness in the cured state with an intermediate cross-link density. It is soluble in aromatic solvents. It is an amber, waxy solid at room temperature and can be cast as a hot melt or from solution to form pliable, non-tacky films. This maleimide functional oligomer can be cured thermally, via UV irradiation, or in the presence of free-radical initiators to form a tough thermoset. BMI-5000 is supplied as a 50% solids solution in toluene. The material can also be supplied as a solid slab, powdered solid or in alternative solvents.

JRCure-1055 is lightly yellow clear liquid in appearance.

PL-7010 is an extended urethane dimethacrylate with a relatively low viscosity. It can be added to formulations to improve flexibility. PL-7010 is low color and non-yellowing upon cure.

SILLITIN Z 89 similar to Sillitin Z 86 but has a higher color requirements.

PHOTOMER® 4017 TF (HDDA) is a low viscosity diluent for UV and EB radiation curable lacquers and pigmented coatings, used in paper and board coatings, wood finishes vinyl flooring and flexible vinyl.

CE CRYL 800 is a 80% Epoxy Acrylate Oligomer with 20% monomer (DPGDA).

PL-200 is an effective hydrophilic fumed silica providing excellent gloss and rheology control in inks, coatings, adhesives gel coats and resins.

FUMISIL® 150 is a fluffy white-blue fine amorphous powder with extremely small particle size, enormous surface area and high purity, without taste and odor.