Products in Other Adhesives & Sealants Applications: Bisphenol Epoxy...

ALBIDUR® VE 3940 is a concentrated dispersion, comprising 40% high-performance elastomer within a Bisphenol A epoxy vinyl ester resin. This product serves the essential purpose of enhancing the toughness of vinyl ester resins that would otherwise be brittle. The elastomeric component in use is a specialized silicone rubber, meticulously distributed within the liquid resin as a finely dispersed second phase.

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Kukdo Chemical KD-4014 Epoxy Resins are bisphenol-A type half-capped epoxy resin, and designed for applications of high performance powder coating, especially FBE(Fusion Bonded Epoxy coating). The most advantage of these products is that residual bisphenol-A content is the less than one percent by weight. Also, these products have excellent performance of block resistance, chemical resistance and mechanical properties.

RIKARESIN BPO-20E is used in the fields of adhesives, paints and electricity to improve toughness, flexibility and adhesion. Liquid epoxy resin with bisphenol A skeleton. Since it has excellent impregnation properties, it is also used for FRP molding and casting. Improves heat cycle property, thermal shock resistance and shock resistance.

Razeen® LR 2783 is a low viscosity epoxy resin based on Bisphenol A\F modified with aliphatic glycidyl ether.

Araldite® GY 6010 is a general purpose unmodified epoxy resin based on Bisphenol A with medium viscosity.

Triune Chemicals and Materials LE-828LV is less crystallize resin which can be widely used in all applications like Coatings, Adhesive, Casting, Composite, Civil Engineering and Electric and electronics fields..

Razeen® LR 2282 is a general purpose unmodified epoxy resin based on Bisphenol F with medium viscosity.

CHS-EPOXY 590 Is BPF type.

Triune Chemicals and Materials LE-826 is lower viscosity BPA type product which can be widely used in all applications like Coatings, Adhesive, Casting, Composite, Civil Engineering and Electric and electronics fields..

Kukdo Chemical KD-3013 Epoxy Resins are bisphenol-A type half-capped epoxy resin, and designed for applications of high performance powder coating, especially FBE(Fusion Bonded Epoxy coating). The most advantage of these products is that residual bisphenol-A content is the less than one percent by weight. Also, these products have excellent performance of block resistance, chemical resistance and mechanical properties.

Razeen® LR 2253 is a low viscosity epoxy resin based on bisphenol A and modified with aliphatic diglycidyl ether.

Synpol 280 Epoxy Resin is a very high viscosity epoxy resin based on Bisphenol A & Epichlorohydrine.

CHS-EPOXY 573 Is a Bisphenol A/F epoxy resin

Razeen® LR 2740 is low viscosity Bisphenol A/F based liquid epoxy resin, modified with mono-functional reactive diluent.

Razeen® LR 1100 is a general purpose unmodified epoxy resin based on Bisphenol A with medium viscosity.

Razeen® LR 2810 is a low viscosity epoxy resin based on bisphenol A/F and modified with an aliphatic diglycidyl ether.

CHS-EPOXY 572 is a Bisphenol A/F epoxy resin

Synpol 220 Epoxy Resin is an epoxy resin based on Bisphenol A and Epichlorohydrine modified with reactive diluent.

Razeen® LR 2254 is a low viscosity epoxy resin based on bisphenol A and modified with an aliphatic monoglycidyl ether.

EPIDIAN® 6 is used in anti-corrosive paints.

EPIDIAN® 6F is used in anti-corrosive paints.

CHS-EPOXY 571 is a Bisphenol A/F epoxy resin.

Triune Chemicals and Materials LE-828 is standard BPA type epoxy product which can be widely used in all applications like Coatings, Adhesive, Casting, Composite, Civil Engineering and Electric and electronics fields..

EPIDIAN® 6D is used in anti-corrosive paints.

CHS-EPOXY 525 is a BPA type.

Triune Chemicals and Materials LE-834 is semi solid type with higher molecular weight which can be widely used in all applications like Coatings, Adhesive, Casting, Composite, Civil Engineering and Electric and electronics fields..

Triune Chemicals and Materials LE-828E is standard BPA type electronics grade which can be widely used in all applications like Coatings, Adhesive, Casting, Composite, Civil Engineering and Electric and electronics fields..

EPIDIAN® 6FD is used in anti-corrosive paints.

Springfield Industries SP-612A is an epoxy flexibilizer formulation used toadd flexibility and impact resistance to epoxyadhesives and coatings. It is bisphenol A epoxy basedwith a polysulfide flexibilizing component andproduces a transparent coating when used with anappropriate curing agent.

Araldite® GY 6020 is a high viscose unmodified resin based on Bisphenol A.

Razeen® LR 2257 is a low viscosity epoxy resin based on Bisphenol A modified with aromatic glycidyl ether.