Products in Other Adhesives & Sealants Applications: Filler

AKTIFIT AM is a SILFIT Z 91 coated with amino functional silane.

VALCAL 307 is ground Calcium Carbonate based products made from very white, pure crystalline CaCO3 with low oil absorption properties.

Talc SR 6M has good chemical resistance for applications in paint and coating formulations; it improves corrosion resistance, water permeability, and film integrity. This talc can also be used in construction products such as joint compound, adhesives, sealants, putties, and caulks.

Glass Microspheres HGT40 are hollow spheres of glass manufactured for a wide variety of uses in consumer goods, medicine, research and numerous industries from Aerospace to Automotive. Hollow glass microspheres from Ceno Technologies, sometimes termed microballoons or glass bubbles, have diameters sized in micrometers (microns).

ExBar® W 2 is manufactured using only the highest quality white, natural barium sulfate ore. Strict quality control results in consistent products that are used in coatings, paint, plastics, rubber, sealants, friction materials and many other applications where color, purity and particle size are principle concerns.

Vitro Minerals LA-500(1) are functional fillers and extenders produced from clean, post-industrial, glass feedstocks. X-ray diffraction and scanning electron microscopy confirms that the LA Glass calcium aluminosilicate powders are fully amorphous and contain no crystalline silica. The glass chemistry results in relative chemical inertness, making LA Glass resistant to blooming, blistering, or chemical degradation in harsh environments. LA Glass powders enhance a wide range of paints, coatings, plastics, and adhesives. High consistent brightness, tint retention and stain/scrub resistance can be achieved in most paint and coating systems. LA Glass powders have low oil absorption and can be easily dispersed in water- or solvent-based systems. The feedstocks are certified post-industrial and are free from contaminants associated with post-consumer curbside glass.

Vitro Minerals LA-700(1) are functional fillers and extenders produced from clean, post-industrial, glass feedstocks. X-ray diffraction and scanning electron microscopy confirms that the LA Glass calcium aluminosilicate powders are fully amorphous and contain no crystalline silica. The glass chemistry results in relative chemical inertness, making LA Glass resistant to blooming, blistering, or chemical degradation in harsh environments. LA Glass powders enhance a wide range of paints, coatings, plastics, and adhesives. High consistent brightness, tint retention and stain/scrub resistance can be achieved in most paint and coating systems. LA Glass powders have low oil absorption and can be easily dispersed in water- or solvent-based systems. The feedstocks are certified post-industrial and are free from contaminants associated with post-consumer curbside glass.

MICROVER DP2 is used as mineral filler in paints, adhesives, rubbers, sealants and fillings with natural high purity of sedimentary origin.

Glass Microspheres HGT60 are hollow spheres of glass manufactured for a wide variety of uses in consumer goods, medicine, research and numerous industries from Aerospace to Automotive. Hollow glass microspheres from Ceno Technologies, sometimes termed microballoons or glass bubbles, have diameters sized in micrometers (microns).

Austin Black 325 is produced from high quality, low volatile, bituminous coal. It is a dry, finely divided powder used in many markets. Because of Austin Black's low specific gravity, it can be a very effective cost saving filler. For a technical data sheet or safety data sheet, please contact us directly.

PIQ-White Premium Filler 70 is a general purpose filler primarily intended for elastomeric compounding. Likely applications in elastomers include footwear, housewares, lawn and garden equipment, recreational equipment, aircraft and automotive parts. Also, the material may be used in some Fiberglass Reinforced Plastic (FRP), Sheet Molding Compound (SMC) and Bulk Molding Compounds (BMCs) instead of more finely ground fillers. (Available in bagged, super sack or bulk).

Aspanger Aspolit Aspolit F70 is a special 3-component filler consisting of the minerals muscovite, quartz and chlorite from its own deposit.

Nigtas 5 has its applications in Water based Interior / Exterior Paints, Primers and Pastes, Long Oil Synthetic Paints, Rapit based Industrial Paints, Short Oil Cellulosic Paints, Marine Paints, Furniture Paints, Epoxy Paints, Printing Inks, Static Powder Coatings.

VERDOL D-325 is used as mineral filler in paints, adhesives, rubbers, sealants and fillings with natural high purity of sedimentary origin.

Aspanger mica MICA F is a muscovite mica from its own deposit.

Microcarb® designed to be used in the production of water based coatings and paints allow for matt to gloss finishes, offering a good balance between coverage, whiteness and stability (Low Binder Demand). In addition, ultrafine qualities allow for the reduced consumption of titanium dioxide and other expensive extenders like PCC and Aluminum silicate.

West System 404-B High-Density Adhesive Filler, 30 lb is an epoxy thickening additive. We developed it for maximum physical adhesive properties in hardware bonding, or anywhere that high-cyclic loads are anticipated. Blended with epoxy, it makes an excellent gap filler or structural filets. Use this filler wherever you need an especially strong bond. You can blend it into any WEST SYSTEM 105 Resin/20X Hardener combination, G/flex Epoxy 650, or G/5 Five-Minute Adhesive.

Vitro Minerals LA-300 are functional fillers and extenders produced from clean, post-industrial, glass feedstocks. X-ray diffraction and scanning electron microscopy confirms that the LA Glass calcium aluminosilicate powders are fully amorphous and contain no crystalline silica. The glass chemistry results in relative chemical inertness, making LA Glass resistant to blooming, blistering, or chemical degradation in harsh environments. LA Glass powders enhance a wide range of paints, coatings, plastics, and adhesives. High consistent brightness, tint retention and stain/scrub resistance can be achieved in most paint and coating systems. LA Glass powders have low oil absorption and can be easily dispersed in water- or solvent-based systems. The feedstocks are certified post-industrial and are free from contaminants associated with post-consumer curbside glass.

Alteo LVSH1 is used in a wide variety of applications and polymer systems which consists of low fines content and a very well defined topcut, viscosity optimized. It is available from from 25 to 4 microns.

ASCOM 70 limestone powder is the highest whiteness and high purity with low iron, silica and magnesium levels. Limestone is derived from enormous reserves.

EXCAL® CW 200 processed from a high purity white calcium carbonate marble ore, to exact specifications.Used in oil and gas completion fluids, plastics, coatings, adhesives and other specialty applications where color, solubility, binder demand are of importance.

Alteo LVSH3 is used in a wide variety of applications and polymer systems which consists of low fines content and a very well defined topcut, viscosity optimized. It is available from from 25 to 4 microns.

Aspanger mica MICA SFG70 is a muscovite mica from its own deposit.

SILLITIN Z 86 puriss has a fine particle size distribution and good color neutrality.

HALTEX® 310 is an economical, non-toxic, flame retardant & smoke suppressant filler produced in the at TOR Minerals- US for supply to the North American market. HALTEX features tightly controlled particle sizing to meet specific application performance requirements. Quality is suitable for a broad range of uses including: Electrical Components, Sheet Molding Compound (SMC), Bulk Molding Compound (BMC), Adhesives & Sealants, Roof Coatings, Foam Insulation and Rubber Mining Belts.

Micromarmo Granulati Fine Pink Natural Calcium Carbonate (CCN) is an excellent quality-price ratio product and produced in large quantities and availability in stock, so as to guarantee consistency and safety in supplies. Company pay a lot of attention to the precision in the requested particle sizes , also adapting to specific and particular needs.

Alteo LVSH2 is used in a wide variety of applications and polymer systems which consists of low fines content and a very well defined topcut, viscosity optimized. It is available from from 25 to 4 microns.

Nigtas 10 has its applications in Water based Interior / Exterior Paints, Primers and Pastes, Epoxy Paints, Marine Paints, Epoxy Paints, Static Powder Coatings.

ASCOM 50 limestone powder is the highest whiteness and high purity with low iron, silica and magnesium levels. Limestone is derived from enormous reserves.

West System 404-15 High-Density Adhesive Filler, 15.2 oz is an epoxy thickening additive. We developed it for maximum physical adhesive properties in hardware bonding, or anywhere that high-cyclic loads are anticipated. Blended with epoxy, it makes an excellent gap filler or structural filets. Use this filler wherever you need an especially strong bond. You can blend it into any WEST SYSTEM 105 Resin/20X Hardener combination, G/flex Epoxy 650, or G/5 Five-Minute Adhesive.

MICROVER DP4 is used as mineral filler in paints, adhesives, rubbers, sealants and fillings with natural high purity of sedimentary origin.

HALTEX® 302 is an economical, non-toxic, flame retardant & smoke suppressant filler produced in the at TOR Minerals- US for supply to the North American market. HALTEX features tightly controlled particle sizing to meet specific application performance requirements. Quality is suitable for a broad range of uses including: Electrical Components, Sheet Molding Compound (SMC), Bulk Molding Compound (BMC), Adhesives & Sealants, Roof Coatings, Foam Insulation and Rubber Mining Belts.

VERDOL D-500 is used as mineral filler in paints, adhesives, rubbers, sealants and fillings with natural high purity of sedimentary origin.

Southeastern Performance Minerals OPTIbrite is a wet processed muscovite mica with a platy shape, high aspect ratio, chemical inertness, and superior color.

VALCAL 10C is ground Calcium Carbonate based products made from very white, pure crystalline CaCO3 with low oil absorption properties, coated with stearic acid.

EXCAL® 100 processed from a high-purity buff colored limestone ore to exact specifications. Suitable for use in loss circulation drilling fluids, building materials and other industrial applications where lower economics are necessary.