Products in Transportation Assembly

UNI-REZ 2248 polyamide resin is an alcohol soluble type resin for flexographic printing. It has high compatibility with nitrocellulose, excellent gel resistance, and excellent moisture tolerance.

Kolon Industries HIKOREZ® H-2200 is a pale yellow thermoplastic resin obtained from C5 aliphatic olefin and C9 aromatic olefin generated in the thermal-cracking process of naphtha, and offers better color heat stability and lower odor than the previous C5 hydrocarbon resins. This product has excellent compatibility with Ethylene-Vinyl-Acetate (EVA) and Styrene-Butadiene-Styrene copolymer (SBS), and is used as tackifier. HIKOREZ® H-2200 is light color aromatic modified, cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SBS block copolymers and metallocene polyolefins. .

AGITAN 217 is a highly effective defoamer for all common aqueous emulsions. The product is ideal for pigmented systems as well as for adhesives based on animal glue and emulsions.

UNI-REZ 1533 polyamide resin is a co-solvent type resin which is soluble in alcohols, but typically requires mixtures of aliphatic hydrocarbons and alcohols for gel stability. UNI-REZ 1533 polyamide resin provides fast solvent release, good gel resistance, and excellent grease resistance in flexographic / gravure inks for plastic substrates.

UNI-REZ 2218 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.

A workhorse and cost-effective oil-based defoamer for adhesive applications. AGITAN 5018 provides excellent compatibility, dispersibility and long term performance in a wide variety of adhesive and coatings formulations.

Silquest™ A-1387 Silane is a Silicone Release Coating.

POLYTONE™ AP 132 is a non heat reactive thermoplastic unmodified phenol-formaldehyde resin designed to give a consistent performance as a reinforcing resin in synthetic and natural rubber based goods that require high hardness, excellent chip and abrasion resistance when cross linked with a methylene donor.

Kolon Industries SUKOREZ® SU-130 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and is compatible with various elastomers, including Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-130 is waterwhite thermoplasic resin obtained from polymerization and hydrogenation of cyclic ingredients. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) and solvent based pressure sensitive adhesive(SBPSA), because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate(EVA), styrene block copolymer(SBC).

AGITAN E 255 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN E 255 is resistant to alkaline and acid environment. It can be used between pH 2 and 11.

Polybut™ X10 is a low molecular weight conventional polybutene.

Polybut™ 30 is a low molecular weight conventional polybutene.

Kolon Industries HIKOREZ® T-1100 is a pale yellow thermoplastic resin obtained from the copolymerization of C5 aliphatic olefin, diolefin and C9 aromatic olefin generated in the thermal-cracking process of naphtha. It is used together with natural rubber for solvent based pressure sensitive adhesive (SBPSA), and offers excellent compatibility with Styrene-Isoprene-Styrene copolymer (SIS) and is used as tackifier for hot melt pressure sensitive adhesive (HMPSA). .

Kolon Industries SUKOREZ® SU-210 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and is compatible with various elastomers, including Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-210 is water white cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.

Kolon Industries SUKOREZ® SU-110S is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and is compatible with various elastomers, including Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-110S is water white cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.

AGITAN P 803 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 803 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 803 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds.

CoatOSil™ 7602 coatings additive is a silicone copolymer with a polyethylene-oxide (EO) pendant side chain. The silicone portion of the molecule can help provide benefits such as good mar resistance and antiblock capabilities. The EO component enables ide compatibility with water-borne coatings and inks. This chemical structure makes CoatOSil™ 7602 coatings additive an excellent candidate for water-borne coatings and inks requiring a low coefficient of friction (COF) for increased slip.

UNI-REZ™ 2501 is a thermoplastic polyamide resin. Used in high gloss paints. Offers a high degree of thixotropy. Possesses very good flow and leveling characteristics.

Silquest™ A-1871 Epoxy Silane is a gamma-Glycidoxypropyltriethoxysilane. Acts as adhesion promoter. This epoxy functional silane provides outstanding chemical resistance, mechanical properties, improved adhesion to glass and metal substrates. It also provides crosslinking of waterborne latexes and dispersions; acrylic, styrene acrylic or other copolymers, polyurethane or epoxy dispersions. Has enhanced electrical properties of epoxy based electronic encapsulants and packaging materials, resulting from improved bonding between resin, substrate or filler. Improved wet adhesion reduces the risk of semiconductor or integrated circuit failure as a result of water ingress or surface corrosion. It also has improved dry adhesion and tensile strength. Use of epoxy silane may avoid the yellowing sometimes seen when amino functional adhesion promoters are used and it also has improved shelf stability over aminosilane alternatives. It is used in caulking applications.

Kolon Industries HIKOREZ® T-1095 is a pale yellow thermoplastic resin obtained from the copolymerization of C5 aliphatic olefin, diolefin and C9 aromatic olefin generated in the thermal-cracking process of naphtha. This resin offers excellent compatibility with Ethylene-Vinyl-Acetate (EVA) or Styrene-Isoprene-Styrene copolymer (SIS), and is mainly used as tackifier for hot melt pressure sensitive adhesive (HMPSA) and hot melt adhesive (HMA). HIKOREZ® T-1095 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are hot melt based pressure sensitive adhesive(HMPSA), especially Stryene-Isoprene-Styrene (SIS) based PSA. And this grade also can be used as tackifier for hot melt adhesive(HMA), because of its good compatibility with base polymer such as EVA. .

UNI-REZ 2226 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.

UNI-REZ 106/1 polyamide resin is a co-solvent type resin which is soluble in alcohols, but typically requires mixtures of aliphatic hydrocarbons and alcohols for gel stability. UNI-REZ 106/1 polyamide resin provides fast solvent release and good grease resistance in flexographic / gravure inks for plastic substrates and is especially effective as an overprint lacquer.

AGITAN P8850 is a cost effective and economical powder defoamer specifically designed for use in grout, self-leveling compounds and most other powdered building materials. It combines a cutting edge, unique composition with ease of handling to create additional value to the end user.

Kolon Industries SUKOREZ® SU-230S is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and C9 aromatic olefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers such as Ethylene-Vinyl-Acetate (EVA), Styrene-Isoprene-Styrene copolymer (SIS) and Styrene-Butadiene-Styrene copolymer (SBS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-230S is water white aromatic modified, cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SBS block copolymers, and metallocene polyolefins and APAO.

Kolon Industries HIKOREZ® A-1100 is a pale yellow thermoplastic resin obtained from the polymerization of C5 aliphatic olefin and diolefin generated in the thermal-cracking process of naphtha. This resin provides well-balanced adhesion properties such as adhesive strength, bond strength and cohesive force required for pressure sensitive adhesive (PSA), and is mainly used as tackifier and hot melt adhesive (HMA) for pressure sensitive adhesive. This resin also can be used as the binder for hot melt road marking (HMRM). .

UNI-REZ 2632 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2632 hot melt polyamide adhesive has excellent low temperature flexibility and adhesion to various plastic substrates. The low viscosity and moderate softening point allows for lower application temperatures when used with temperature sensitive substrates.

Kolon Industries HIKOREZ® A-1100S is pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are tackifier for pressure sensitive adhesive, because of its well balanced PSA properties such as tackness, adhesive strength and cohesive strength. And this grade also can be use as the binder for hot melt road marking. .

POLYTONE™ AP 130 is a non heat reactive thermoplastic alkyl phenolic resin designed to give a consistent performance as a reinforcing resin in synthetic and natural rubber based goods that require high hardness, excellent chip and abrasion resistance when cross linked with a methylene donor.

SÜDRANOL® 200 is a waterbased polyethylene wax-compounddispersion for use in paint- and varnish-systems especially in gloss dispersion, lacquers and glazes. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

Polybut™ X2 is a low molecular weight conventional polybutene.

Only available in Asia! A universal defoamer effective in most adhesive applications including PSA, laminating, packaging, envelope, wood glue, construction and natural/neoprene formulations. AGITAN A201 may also be utilized in OPV, printing ink, emulsion polymers of all chemistries, architectural coatings and high gloss industrial coatings.

UNI-REZ 2210 polyamide resin is an alcohol soluble / co-solvent type resin with excellent solvent release and blocking properties. UNI-REZ 2210 polyamide resin was developed for release lacquers but can also be used as a modifying resin to improve hardness.

WÜKONIL® HS is a polymer wax-dispersion for waterborne coating systems.Properties and advantages are improves scrub resistance Improves slip Improves blocking stability Very low particle size. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

AGITAN P 813 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 813 results in low foaming solutions, specifically aqueous pastes or masses with very low air content.

AGITAN 301 has little odor and taste. A non-ionic structure provides excellent compatibility with most common binders. It is recommended for biodegradable formulations.

Kolon Industries HIKOREZ® T-3095 is a pale yellow thermoplastic resin obtained from the copolymerization of C5 aliphatic olefin, diolefin and C9 aromatic olefin generated in the thermal-cracking process of naphtha. This resin is used together with natural rubber for solvent-based pressure sensitive adhesive (SBPSA), and offers excellent compatibility with Styrene-Butadiene-Styrene copolymer (SBS) and is used as tackifier for hot melt pressure sensitive adhesive (HMPSA). The major usages are tackifier for solvent based pressure sensitive adhesive(SBPSA), hot melt based pressure sensitive adhesive(HMPSA) and hot melt adhesive(HMA). .