Products in Adhesives & Sealants: Epoxies (EP)

PL-TINP is a highly efficient hydroxyphenol benzotriazole ultraviolet light absorber (UVA).

High strength 100% solid colorants with broad compatibility in a wide variety of conventional, low and zero VOC water based coatings and inks. Pigments used in PanTINT 18 Series have been selected to meet the durability and transparency requirements of most high performance applications.

Alteo SH100 is used in a wide variety of applications and polymer systems which consists of low fines content and a very well defined topcut. It is available from from 25 to 4 microns.

Solvent-free chip dispersions for use in solvent borne and radiation cured coatings and inks. PanTINT 12 Colorants are based on a unique modified thermoplastic acrylic resin with exceptionally broad compatibility. Pigments used in the PanTINT 12 Series have been selected to meet the durability and transparency requirements of most high performance applications.

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

PIQ-White Filler 300 is a fine sized dry pulverized carbonate filler. Material is available in 50 lb. paper bags, palletized and stretch wrapped, 2000 lb. mini bulk bags or in bulk. Piqua Minerals fillers are available with various average particle sizing for other filler applications.

BRASMIDE R 15 is a reactive polyamide resin with high viscosity.

Kanamoll is a vegetable oil-based light colored secondary plasticizer. ESBO is manufactured from soybean oil through the process of epoxidation. It is been used widely as plasticizer because of high numbers of epoxidized carbon-carbon double bonds. The epoxide group is more reactive due to double bonds, thus making it a good hydrochloric acid scavenger and plasticizer.

High strength 100% solid colorants with broad compatibility in a wide variety of conventional, low and zero VOC water based coatings and inks. Pigments used in PanTINT 18 Series have been selected to meet the durability and transparency requirements of most high performance applications.

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

High strength 100% solid colorants with broad compatibility in a wide variety of conventional, low and zero VOC water based coatings and inks. Pigments used in PanTINT 18 Series have been selected to meet the durability and transparency requirements of most high performance applications.

Concentrated pigment dispersions for use in solvent borne high performance coatings. PanTINT 86 Colorants are based on a unique thermoplastic acrylic vehicle with exceptionally broad compatibility. Pigments used in the PanTINT 86 Series have been selected for superior lightfastness, and resistance to heat and chemical attack.

High strength 100% solid colorants with broad compatibility in a wide variety of conventional, low and zero VOC water based coatings and inks. Pigments used in PanTINT 18 Series have been selected to meet the durability and transparency requirements of most high performance applications.

KİSAMİD® 1038 is a modified aliphatic polyamine with excellent resistance against water and chemicals such as inorganic acids. used for SF coatings, mortars, adhesives, laminates, castings.

NOFO 1032 is a blend of silicone and organic acid esters. Designed for use in most nonaqueous based coating systems, adhesives and inks. Allows for air release of high build epoxy, urethane, and various casting resins.

West System 407-B Low-Density, 14 lb is a blended microballoon-based fairing filler for WEST SYSTEM Epoxy. Add 407 to a mixture of epoxy resin/hardener to create a fairing putty. It’s easy to sand or carve this putty once it has cured. The filler is reasonably strong on a strength-to-weight basis. You can blend it into any WEST SYSTEM 105 Resin/20X Hardener combination, G/flex Epoxy 650, or G/5 Five-Minute Adhesive. Blended with epoxy to a “peanut butter” consistency, it will be easy to fair. The higher the percentage of 407 in your epoxy mix, the easier it will be to fair. Cures to a dark red/brown color.

Resicure® EMI-24 is commonly used as a sole curing agent or as a dicy and anhydride cure accelerator in epoxy resin based formulations. Typical loading level as a sole curing agent is about 1-5 phr and as a dicy and anhydride cure accelerator is about 0.5 – 3.0 phr. Resicure EMI-24 LV is a lower viscosity version of Resicure EMI-24.

Drolite™ 9040 is a phenalkamine used as a curing agent for various epoxy resins. Specially for marine coatings and other Industrial applications.

Solvent-free chip dispersions for use in solvent borne and radiation cured coatings and inks. PanTINT 12 Colorants are based on a unique modified thermoplastic acrylic resin with exceptionally broad compatibility. Pigments used in the PanTINT 12 Series have been selected to meet the durability and transparency requirements of most high performance applications.

Curamine 30-510 is a conventional amido-amine with medium imidazoline content and moderate reactivity.

AKTISIL PF 777 is a SILLITIN Z 86 coated with alkyle silane.

epamine pa41 is a fast curing, mainly used for epoxy - PU adhesives.

BRASMIDE R 25 is a reactive polyamide resin with medium viscosity

Curamine 30-697 is a modified polyamide with very high flexibility and toughness – high loading level.

Merginamid A 160 is a solvent-free modified polyaminoamide-adduct that is able to emulsify unmodified and modified liquid epoxy resins as well as dispersions of solid epoxy resins in water. After evaporation of the water homogenous films with unobjectionable coating properties are obtained.

Puyang Ruicheng Chemical DCPD petroleum resin RC-D120 is the pale yellow thermoplastic resin obtained from mainly polymerizing unsaturated dicyclopentadiene derived from a special process, at a certain temperature and pressure, formed by the polymerization of low molecular weight polymer. D120 has a good compatibility with ester and polyurethane solvents. In the ester solvent, it has a good compatibility with epoxy resin, furthermore it has a good curing speed with epoxy resin .It can be used as the modifier for the marine paints and some other special paint as well as the shrinkage force to the cement and steel, furthermore, it also can strengthen the wetting property to paint and improve the leveling property of paint film.

Technirez® NC-36 is adduct of a semi-solid epoxy novolac resin and a carboxyl terminated butadiene acrylonitrile elastomer. NC-36 is used with epoxy resins to improve toughness, adhesion and fatigue resistance while maintaining thermal properties.

XYSIL® R120B is a fumed silica after treated with DDS(Dimethyldichlorosilane). It is based on a hydrophilic fumed silica with a specific surface area of 150m2/g.

SB-36 is a ground high whiteness Alumina Trihydrate (ATH) flame retardant with an average median particle size of 25 microns in adhesives, caulks and sealants applications.

Deolink Epoxy TE-100 and Deolink Epoxy TM-100 are reactive bonding and coupling agents which are compatible with a large number of resins, like epoxy, acrylic, urethanes etc. Compared with amino silanes, Deolink Epoxy TE-100 and Deolink Epoxy TM-100 will not cause yellowing and can support the shelf life

Silquest™ Y-9627 is secondary aminofunctional bis-silanes. This category of silanes is generally useful to consider for a broad range of applications to promote adhesion in coatings, adhesives and sealants between organic polymers and glass, metal, wood or cast plastic substrates. Typically, they can function as coupling agents to particulate mineral fillers in composites, as in foundry molds and cores, to improve mechanical properties such as tensile and flexural strengths. These property improvements have been maintained in the presence of aggressive environments, such as high temperature and high humidity conditions.

SB-432 ATH developed especially for SMC, BMC, resin injection and high solids coatings, has a unique particle size distribution that provides the best possible combination of viscosity, flame, electrical and molding properties that can be derived from an ATH filler. A closely controlled top size with a large super fine faction yields rapid dispersion in resin. Excellent mold flow and wet-out characteristics result in superior surface profile, minimal porosity, even pigmentation, and excellent filler and reinforcement distribution throughout the molded part.

High strength, APE free colorants with compatibility in a wide variety of conventional, low and zero VOC* water based systems. Easy to use PanTINT 94 Colorants are based on a proprietary combination of surface active agents resulting in exceptional system compatibility. They have little or no effect on viscosity, gloss, cure time, resistance to water spotting or exterior durability. They will not support the growth of microorganisms.

Hubercarb® Q4 is a fine ground calcium carbonate produced at Huber’s Quincy, Illinois plant which is known for its natural uniformity producing consistent purity and brightness. Carefully controlled particle distribution allows the material to be used in a wide range of applications including paints, coatings, adhesives, caulks, plastics, and construction building products.

Finomide 1125 is a reactive polyamides which are utilized primarily as curing agents for epoxy resins used in surface coatings ,Adhesives, Decorative Coatings, Laminations, Pottings.

Curamine 30-517 is a conventional amido-amine with low imidazoline content, pre-accelerated.