Products in Adhesives & Sealants: Waterborne Coating

HIFILL® 17 is a calcium carbonate filler and reinforcer that is produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have low oil absorption, which can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

DeCAL 1201 is a powder-grade rheological control additive that can be used in a wide range of water-based systems. The product is designed to disperse and rapidly wet out in aqueous systems. Alternatively, the product can be incorporated into powder blends and formulations.

DeCAL 5032 is designed to release bubbles and control foam generated in a wide range of aqueous systems containing surfactants. They are blends of non-ionic surfactants and hydrophobes in a highly refined mineral oil. They are non-silicone based. It is used in many applications including water-based paints, adhesives, carpet backing, paper coating, and effluent treatment.

OMACIDE™ IPBC 40 Industrial Fungicide is a pungent aromatic, pale yellow to amber-colored liquid broad spectrum fungicide additive. It is used in architectural coatings, textiles, construction applications such as paints, stains, adhesives, caulks, and sealants, as well as plastic product applications to prevent dry film fungal growth. OMACIDE™ IPBC 40 Industrial Fungicide is also a very effective additive for controlling fungal growth in aqueous-based fluids such as inks and metalworking fluids.

OMACIDE™ IPBC 30 Fungicide is a broad spectrum liquid fungicide based on the widely used fungicide active, 3-iodopropynyl butylcarbamate (IPBC). It imparts dry film protection against fungal growth when formulated in exterior paints and coatings, wood stains, adhesives, caulks, sealants, paper coatings, textiles, and plastics. OMACIDE™ IPBC 30 Fungicide also provides excellent fungal control when used in inks and metalworking fluid systems.

Texicryl® 13-814 is a styrene acrylic copolymer aqueous dispersion with excellent flexibility and adhesion properties. It is suitable for use as the main binder in flexo or gravure inks and has good clarity so is suitable for offset overprint. This acrylic dispersion will also be suitable to compound into barrier coatings, as it exhibits very low MVTR and Cobb values.

Texicryl® 13-319 is a hydrophobically modified alkali swellable emulsion designed for use as a rheology modifier in waterbased formulations. It is highly effective in modifying viscosities at low shear rates to avoid both settling and sagging. It has been designed for use in the formulation of textured coatings, woodstains, paints and waterborne coating systems.

Texicryl® 13-308 is an alkali soluble emulsion designed as a thickener for water-based formulations. It can be used in the formulation of ceramic tile adhesives, paints, waterborne coating systems and for use in EN 12004-1and2: 2017 D1 CTAs, a wide range of building adhesives and highly filled coatings.

Texicryl® 13-813 is a modified styrene acrylic copolymer designed for use in off-set overprinting varnishes. It has been formulated to give excellent gloss over print and superior holdout over unprinted areas. It may also be used for certain graphic arts applications to non-absorbent substrates.

Texicryl® 13-607 is a pure acrylic copolymer emulsion designed for use in a broad range of formulations requiring low VOC, low water uptake and excellent water whitening resistance. It is designed for use in artist’s color formulations as well as for low VOC interior and exterior coating systems. It also shows good water blanching resistance.

Texicryl® 13-313 is an alkali swellable thickener designed for water-based formulations. It is highly effective in modifying viscosities at low shear rates to avoid both settling and sagging. It has been designed for use in the formulation of textured coatings, woodstains, paints and waterborne coating systems.

Texicryl® 13-665 is designed for use in a broad range of formulations where low VOC is required. It has been specifically designed MIT free to meet the new regulatory requirements for artist’s color paints. It meets all environmental demands, such as low VOC, APEO-free and formaldehyde-free with no compromise on quality and performance.

Texicryl® 13-070 is a styrene acrylic copolymer emulsion designed primarily as a binder for D1 ceramic tile adhesives. It has been designed to be formulated, with a wide range of filler types, into D1 tile adhesives. It acts as a binder for use in EN 12004-1and2: 2017 D1 CTAs, economic exterior and interior coatings, fence stains and flat paints.

Texicryl® 13-819 is a styrene acrylate based vehicle designed for high gloss heat resistant overprint varnishes. It has been designed for use in hard polymers normally used in the formulating of overprint varnishes, and it can be blended into OPV’s to partially replace the hard polymer and enhance the gloss level. The product is free from APEO based surfactants.

Texicryl® 13-809 is a styrene acrylic emulsion polymer designed for high gloss, water-based overprint varnishes and heat resistant inks. This styrene acrylic binder has been designed to provide superb clarity, water resistance, heat resistance, gloss etc. It can be used as deblocking modifier.

Texicryl® 13-619 is a styrene acrylic copolymer emulsion designed for formulation of co-solvent free construction adhesives. It can be used in the formulation of high performance water resistant tile adhesives, fix and grouts and general purpose fillers. It meets all environmental demands, such as low VOC, APEO-free and formaldehyde-free with no compromise on quality and performance.

Cardolite® NX - 8101 is an epoxy curing agent based on modified CNSL waterborne technology, recommended for epoxy primers and self-levelers for concrete floors.

Texicryl® 13-313 is an alkali swellable thickener crafted specifically for water-based formulations. This product excels in efficiently modifying viscosities at low shear rates to prevent both settling and sagging.

ASCOTRAN® H14 is a multi-metal substrate renowned for its high water-resistance properties.

Ascotran® H18 is a ready-to-use liquid antiflash-rust additive crafted for waterborne coatings. This innovative solution serves as a potent corrosion inhibitor, offering robust protection for metal packaging. Ideal for diverse coating applications, Ascotran® H18 ensures reliable defense against rust and corrosion, safeguarding the integrity of metal surfaces.

Ascotran® H10 is a versatile liquid antiflash-rust additive tailored for waterborne coatings. This ready-to-use solution acts as a hydrophobic agent, safeguarding almost dry films even in harsh ambient humidity conditions. Ascotran® H10 serves as a corrosion inhibitor, ensuring reliable protection for metal packaging. Ideal for diverse coating applications, it offers robust defense against rust and corrosion, preserving the integrity of metal surfaces.

Pangel® M90F is a high-purity smectite-based additive with a selected particle size, specifically designed to adjust the rheology of joint compounds, plasters, and fillers formulated in both powder and paste. It is recommended for applications requiring a fine particle size. Additionally, Pangel® M90F can serve as a binding agent for both organic and inorganic powders. Its high swelling capacity upon contact with water allows it to disperse easily while retaining high resistance when dry.

Texipol® 63-258 is an inverse emulsion thickener known for imparting an extremely short flow to a wide variety of aqueous and non-aqueous compositions, effective across a wide pH range. Supplied as a low-viscosity liquid, it offers almost instantaneous thickening upon direct mixing into the composition. Its polymer, already in solution as the ammonium salt, eliminates the need for additional additives to promote thickening. APEO-free, Texipol® 63-258 is suitable for various applications requiring short flow characteristics.

Texicryl® 13-308 is an APEO-free ASE (Alkali-Swellable Emulsion) rheology modifier designed for a broad range of water-based applications. It imparts a short pseudoplastic flow, enhancing the rheological properties of the system. This product is easily mixed into water-based systems and, in many cases, can be added directly to the system to be thickened, followed by pH adjustment.

Hauthane L-2183 is an anionic, aliphatic waterborne polyurethane dispersion.

Rovene 6090 is a functionally modified, water-based vinyl acetate copolymer latex. As a water-based release coating, Rovene 6090 is recommended as a blending component for Rovene 6091 to modify the degree of adhesive release. On its own, this fast drying, firm copolymer has excellent mechanical stability during application and provides a final coating with very tight release values. When combined with Rovene 6091, release values can be easily tailored to specific needs. Features: Firm hand High riding Fast drying High TMLI release values (tight release) Excellent mechanical stability

Rovene 6091 is a functionally modified vinyl acetate copolymer latex recommended for use as a water-based release coating. As a water based release coating, Rovene 6091 is recommended for use with adhesives exhibiting a high degree of tack. Rovene 6091 is recommended as a blending component for Rovene 6090 to modify the degree of adhesive release. This fast drying, firm copolymer has excellent mechanical stability during application and provides a final coating with easy release. Features: Firm hand High riding Fast drying Low TMLI release values (easy release) Excellent mechanical stability

Falgel® 90 is a fine particle size colloidal clay for use in aqueous coatings. It provides excellent syneresis control, superior anti-settling properties, sag control, and reduces roller splatter.

IrisECO PINK (FB) is a series of water-based high concentrated pigment dispersions for in-plant tinting. Developed for architectural paints, is used also in industrial paints, wood coatings and various other applications. Our colorants are binder-free, VOC-free, APE-free, formaldehyde-free and allow the final product to meet the most stringent health and environmental regulations. IrisECO colorants are produced based on strict quality specifications for perfect reproducibility of color strength, tone and rheology.

IrisColor PINK (PC) ia a series of universal pigment dispersions specific for architectural paints and enamels for interiors and exteriors, formulated to be used for in-plant tinting. Our colorants are binder-free, VOC-free, APE-free, formaldehyde-free and allow the final product to meet the most stringent health and environmental regulations. IrisColor colorants are produced based on strict quality specifications for perfect reproducibility of color strength, tone and rheology.

IrisECO GREEN OXIDE (GX) is a series of water-based high concentrated pigment dispersions for in-plant tinting. Developed for architectural paints, is used also in industrial paints, wood coatings and various other applications. Our colorants are binder-free, VOC-free, APE-free, formaldehyde-free and allow the final product to meet the most stringent health and environmental regulations. IrisECO colorants are produced based on strict quality specifications for perfect reproducibility of color strength, tone and rheology.

IrisBlend W RED OXIDE (XRO) is a series of water-based colorants, specific for architectural paints for interiors and exteriors, designed to be used with tinting equipment. Our colorants are binder-free, VOC-free, APE-free, formaldehyde-free and allow the final product to meet the most stringent health and environmental regulations. IrisBlend W colorants are produced based on strict quality specifications for perfect reproducibility of color strength, tone and rheology.

IrisColor RED OXIDE (OX-R) ia a series of universal pigment dispersions specific for architectural paints and enamels for interiors and exteriors, formulated to be used for in-plant tinting. Our colorants are binder-free, VOC-free, APE-free, formaldehyde-free and allow the final product to meet the most stringent health and environmental regulations. IrisColor colorants are produced based on strict quality specifications for perfect reproducibility of color strength, tone and rheology.

IrisECO ORANGE (R) is a series of water-based high concentrated pigment dispersions for in-plant tinting. Developed for architectural paints, is used also in industrial paints, wood coatings and various other applications. Our colorants are binder-free, VOC-free, APE-free, formaldehyde-free and allow the final product to meet the most stringent health and environmental regulations. IrisECO colorants are produced based on strict quality specifications for perfect reproducibility of color strength, tone and rheology.

IrisBlend U BLACK (UN) is a series of universal colorants, specific for architectural paints for interiors and exteriors, designed to be used into tinting equipment. Our colorants are binder-free, VOC-free, APE-free, formaldehyde-free and allow the final product to meet the most stringent health and environmental regulations. IrisBlend U colorants are manufactured based on stringent specifications for perfect reproducibility of color strength, tone and rheology.

IrisECO RED (BB) is a series of water-based high concentrated pigment dispersions for in-plant tinting. Developed for architectural paints, is used also in industrial paints, wood coatings and various other applications. Our colorants are binder-free, VOC-free, APE-free, formaldehyde-free and allow the final product to meet the most stringent health and environmental regulations. IrisECO colorants are produced based on strict quality specifications for perfect reproducibility of color strength, tone and rheology.