Products in Adhesives & Sealants: Polyolefins

Adiplast Wax AD - 70 is polyethylene wax used in adhesive manufacturing.

AUROREN® 100 is a specially modified polyolefin resin newly developed with Nippon Paper Industries Chemical Division's original technology. AUROREN® 100 shows excellent adhesion to non-polar substrates such as polypropylene and polyethylene. Good solubility in non-aromatic solvents is also a great advantage of AUROREN® 100.

4 MELT FLOW HOMOPOLYMER FOR STRETCHED TAPE APPLICATIONSPinnacle Polymers Polypropylene 1704 is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for woven products used for carpet backing, sacking, industrial and geotextile fabrics.The 1704 product provides: Excellent color and processing stability Resistance to gas fading Low water carry-over Excellent cleanliness Pinnacle's polypropylene, as marketed by Pinnacle Polymers, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.

RG 1102 XL is a Polypropylene Homopolymer With General Extrusion Additivation. It is used in Extrusion and Injection Molding Applications, Raffia, Tapes, MonoFilaments, Diary Products

Kolon Industries HIKOTACK® P-140 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are vehicles for ing ink. This grade especially shows superior compatibility with rosin modified phenolic resin, so it can be used with phenolic resin in off-set ink to decrease set time and to increase gloss. This grade also can be used as binder for color asphlat and tackifier for EVA based hot melt adhesive(HMA). .

Polyplastics Group Topas® 8007F-04Product DescriptionTOPAS 8007F-04 is a general purpose film extrusion grade. It is a high clarity amorphous resin with high stiffness, moisture barrier, chemical resistance, thermoformability and purity for food and healthcare applications. It is used in monolayer cast applications, and in coextrusions in both cast and blown processes, for a wide variety of film and sheet products requiring excellent optics in applications such as blister, twist, barrier, shrink and easy tear packaging. Industrial uses include formed decorative sheet products. For property enhancement at elevated temperatures, higher glass transition temperature (Tg) grades of TOPAS are recommended.Selected Applications Pharmaceutical blisters Deep draw barrier trays Shrink films and labels Twist films Decorative sheet Food packaging Healthcare and food contact Leading Attributes Clarity, forming, barrier, purity, halogen-free Excellent deep forming, unlike other barriers High shrink, low stress, gloss, clarity, toughness High gloss, outstanding deadfold, clean cutting Gloss, hardness, chemical resistance, forming Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Packaging and Film Extrusion TOPAS 8007F-600 - robust clarity extrusion grade especially for PE blends Topas® 8007F-04Topas® 8007F-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific. Typical application: Film. Primary characteristic: copolymer.

Equate Petrochemical Company EGDA-6888 is a high molecular weight, high density polyethylene copolymer that has been designed specifically for tubular film extrusion. Its broad molecular weight distribution and density have been optimized to give excellent bubble stability at high extrusion rates with high film strength and rigidity. The combination of high strength and excellent drawdown-ability makes EGDA-6888 ideal for down gaging in many applications.

Adiplast Wax AD - 100 is polyethylene wax used in adhesive manufacturing.

HDPE product for stretched tape are divided into product for mono-filament, flat yarn and wool pack. YUHWA HIDEN E308T product can be handled under various processing conditions due to high tenacity and good tensile properties and can be used for fishing nets, ropes, shade nets, wool bags and stretched tapes. This product have good chemical resistance, electric properties, weatherability and flexibility as a product with the good processability.

Kolon Industries HIKOTACK® P-120S is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are rubber compounding agent for tires, tubes, rubber coated clothes. And this grade also can be used as tackifier for Ethylene Vinyl Acetate(EVA) based hot melt adhesive(HMA), water repellent agent, concrete, curing agent and binder for asphalt. .

NIPLENE T20 FR V0 contains characteristics called Homopolymer.

Prime Polymers HI-ZEX® 6800S is a high Density Polyethylene product. It can be processed by extrusion and is available in Asia Pacific, Europe, or North America. Applications of HI-ZEX® 6800S include adhesives/tapes and straps/ropes.

Polyplastics Group Topas® 8007F-600Product DescriptionTOPAS 8007F-600 is a new robust film extrusion grade designed for blending with polyethylene (PE). It is an improved clarity amorphous resin with high stiffness, moisture barrier, chemical resistance, thermoformability and purity for food and general purpose applications. It is used in blends in both cast and blown processes, and in monolayer and multilayer products. Leading film applications include twist wrap, forming webs, protective packaging, shrink films and labels, and easy tear packaging. Industrial uses include formed PE and PP sheet products. For property enhancement at elevated temperatures, higher glass transition temperature (Tg) grades of TOPAS are recommended.Selected Applications Forming films (header bags, etc.) Protective packaging Shrink films and labels Twist films Decorative sheet Food packaging Food contact Leading Attributes Clarity, forming, barrier, purity, halogen-free Stiffness for downgauging, improved forming High shrink, low stress, gloss, toughness Outstanding deadfold, clean cutting Stiffness, chemical resistance, forming, even draw Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Packaging and Film Extrusion TOPAS 8007F-04 - ultimate clarity extrusion grade Topas® 8007F-600Topas® 8007F-600 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific. Typical application: Film. Primary characteristic: copolymer.

Kolon Industries HIKOTACK® P-90 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are rubber compounding agent for tires, tubes, rubber coated clothes. And this grade also can be used as tackifier for Ethylene Vinyl Acetate(EVA) based hot melt adhesive(HMA), water repellent agent, concrete, curing agent and binder for asphalt. HIKOTACK® P-90 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are rubber compounding agent for tires, tubes, rubber coated clothes. And this grade also can be used as tackifier for Ethylene Vinyl Acetate(EVA) based hot melt adhesive(HMA), water repellent agent, concrete, curing agent and binder for asphalt. .

Safrene® F 7740F2 is a high density polyethylene resin which is a medium molecular weight grade ideally suited to the extrusion and subsequent knitting of tapes and monofilaments typically used in agricultural pockets and shade netting. Safrene® F 7740F2 High Density Polyethylene Resin is also used for film extrusion applications where excellent roll geometry is required. As a film it exhibits an excellent barrier to moisture. Safrene® F 7740F2 High Density Polyethylene Resin contains slip and antistatic additives.

Cardia Biohybrid™ BL-M is based on a blend of thermoplastic starch (TPS) and polyolefin's. This grade of resin is compatibilised to offer a high level of mechanical strength, good elongation properties and toughness. The resin is based on corn starch which is an annually renewable material. A hybrid masterbatch with high content of renewable resources in Polypropylene (PP) for molding rigid products. For applications where the use of renewable resources or sustainability are desired and Biodegradability is not required. Can be used by blending Cardia Biohybrid™ BL-M masterbatch with PP in injection molding and extrusion applications. Cardia Biohybrid™ BL-M is formulated with 66% of annually renewable starch. This versatile material is suitable for a wide range of products manufactured by injection molding, extrusion or blow molding processes. Due its content of polyolefins the material is not a fully biodegradable polymer and is not intended for ultimate disposal in commercial composting facilities. For applications in which biodegradability/compostability is required we recommend the usage of Cardia Compostable B-M or T-BM resin.Application Examples Injection molded products such as cutlery, toothbrushes, combs, shavers, golf-tees, etc. Stakes and pegs Horticultural products such as flower pots, planters and stakes Injection molded caps and closures Sheet extruded products such food trays, tubs, disposable plates, strapping and labels Blow molded bottles and toys Profile extruded products such as candy sticks and disposable drinking straws

FULXUS® FX-SB-160 is used by changing the base resin from SEBS to SBS, low cost products can be manufactured. However, it has low weather resistance, and therefore it is not suitable for outdoor use.

Safron® H511 - 03 polypropylene resin is developed for the production of slit film tapes. It offers excellent processability and low water carryover. Safron® H511-03 Polypropylene Resin is also suitable for the production of water quenched blown film and monofilaments.

DuPure E 50 is a polypropylene homopolymer (produced with a phthalate-free catalyst), formulated with a general purpose additivation package.

P4G3Z-050 is a Homopolymer uses Injection Molding for processing. It is produced with Phthalate free Catalyst Systems.

Forlene® HDPE is a special compound, recycled and recyclable, based on high density polyethylene (HDPE), produced and marketed by Forever Plast S.p.A., in national and international market and intended to create plastic products of different kinds of application.

Forlene® HDPE is a special compound, recycled and recyclable, based on high density polyethylene (HDPE), produced and marketed by Forever Plast S.p.A., in national and international market and intended to create plastic products of different kinds of application.

Prime Polymers HI-ZEX® 5000SR is a high Density Polyethylene product. It can be processed by extrusion and is available in Asia Pacific, Europe, or North America. Applications of HI-ZEX® 5000SR include adhesives/tapes and fabrics/fibers.