Products in Adhesives & Sealants: Solventborne Adhesive

Staybelite Ester 10 is the glycerol ester of partially hydrogenated wood rosin.

GC-115 is an aromatic hydrocarbon resin with amber pastille appearance.

ELAPOL 11108 B is a linear, saturated polyester polyol by Elachem. It is manufactured with synthetic aromatic, aliphatic acid and diethylene glycol (DEG).

Solprene 4318 is a linear block copolymer of styrene and butadiene, having 32% of styrene content, most of it forming a polystyrene block, which gives the polymer a thermoplastic behavior.It has a non-staining antioxidant system; FDA approved for use in food contact applications and is essentially gel free with a clear color.Solprene 4318 is used as compounding ingredient for adhesives. The product is an excellent modifier for asphalt applications including self-adhesive roofing membrane and sealant. Also is used in thermoplastic injected shoe soles formulations.

Hot polymerized SBR 1011AC elastomer is recommended for adhesive and pressure sensitive tape and label applications, and in mechanical rubber goods where non-staining and high tack is essential.

Evermore Chemical Industry SS-150BHR is a one component PU adhesives especially for warren release paper, good adhesive and peeling strength.

ANTIOX ASX-HSD is a synergistic blend of variuos antioxidants: phenolic, phosphorous-derivatives and thioester. It has been developed to stabilize natural rubber solvent-based adhesives. The product is a homogeneous powder blend, so to achieve an easy dissolution into the solvent.

EST 5511 99 is a Glycerine ester of Gum Rosin.

NEVPENE® 9545 is a low molecular weight, C5 modified C9 liquid hydrocarbon resin produced by catalytic polymerization of aromatic and aliphatic monomers derived from petroleum feedstocks.

Asahi Kasei Tuftec™ P1500 is a selectively hydrogenated polymer. It is good as a base polymer for pressure sensitive adhesives (PSA). It has excellent compatibility with a variety of tackifiers. With blending tackifier and white oil, it provides solvent-borne as well as hot-melt adhesives. It is particularly suitable for hot-melt adhesive with low viscosity and good thermal stability.

Kraton G1643 V is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 20%. It is supplied from Taiwan in the physical form identified below. Kraton G1643 VS - is supplied as a dusted, dense pellet. Kraton G1643 V is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.

Guangxi Zhongchang Resin RGM128 is a maleic modified glycerine ester of gum rosin. designed to provide aliphatic compatibility in ink or oil paint formulations. The good solubility makes it a good co-resin to adjust solubility parameters in a wide variety of lithographic ink and varnish applications. It is an excellent pigment wetting resin and is recommended for use in economical flushing varnishes for heatset and sheetfed flushes.

ELAPOL 11117 B is a linear, saturated polyester polyol by Elachem. It is manufactured with synthetic aromatic, aliphatic acid and diethylene glycol (DEG).

Kolon Industries SUKOREZ® SU-130 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and is compatible with various elastomers, including Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-130 is waterwhite thermoplasic resin obtained from polymerization and hydrogenation of cyclic ingredients. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) and solvent based pressure sensitive adhesive(SBPSA), because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate(EVA), styrene block copolymer(SBC).

AFEX™ CR23C is a base drying oil called as Corn having no double bond.

ETERAC 7005-40 is Solvent-based PSA.

Kolon Industries HIKOREZ® T-1100 is a pale yellow thermoplastic resin obtained from the copolymerization of C5 aliphatic olefin, diolefin and C9 aromatic olefin generated in the thermal-cracking process of naphtha. It is used together with natural rubber for solvent based pressure sensitive adhesive (SBPSA), and offers excellent compatibility with Styrene-Isoprene-Styrene copolymer (SIS) and is used as tackifier for hot melt pressure sensitive adhesive (HMPSA). .

SUPERCHLON® 833S is a nearly transparent and slightly elastic thermoplastic resin readily soluble in organic solvents. It gives good adhesion to polypropylene, and is used as paint, adhesion promoter for polypropylene, adhesive for polypropylene. Also it can be easily heat-sealed with untreated or pretreated polypropylene film. So it is used as the main component of printing ink with chlorinated ethylene-vinylacetate copolymer.

Evermore Chemical Industry SS-136HR has a excellent flexibility at low temperature with good hydrolysis and solvent resistance. It is also good for re-coating.

RELEASE W 40 GB6 LV is a waterborne release agent based on acrylic polymers added with special releasing agents.

Solprene 1205 is a linear random-block styrene-butadiene copolymer with a total content of 25% of styrene, 17.5% is present as a polystyrene block.It has a non-staining antioxidant system; FDA approved for use in food contact applications. Is essentially gel free with a clear color.Solprene 1205 is an excellent modifier for asphalt, formulations of caulks and sealants; it is also an excellent processing aid for most polymers, giving a good resistance to low temperature. Used in extruded goods, soles and heels. It can also be used as modifier for thermoplastic resins and in adhesive formulations.

Winlex 4100 is a pentaerythritol ester of rosin which has been stabilized to provide excellent heat and aging stability. Useful in a wide variety of adhesives due to its stability, low volatility and polymer compatibility.

COLOR PASTE S AVANA 893 is a dispersion of iron oxides, Titanium dioxide and inert filler in paraffin oil. Pigment concentration: 67%

RELEASE W 45 GB1 is a water-borne release agent based on acrylic polymers containing special releasing agents.

AFEX™ LN20C is a base drying Oil called as Linseed having two conjugated double bonds.

AFEX™ SB30C is a base semi-drying Oil called as Saybean having one conjugated double bonds.

Evermore Chemical Industry SS-1631HR has a excellent flexibility at low temperature with good hydrolysis resistance and excellent abrasion resistance (H22*2kg*300rpm).

RELEASE W20 GB3 is a waterbased release agent, based on acrylic polymers and special releasing agents.

TERGUM 100 is a stabilized pentaerythritol esterified rosin in flakes.

Evermore Chemical Industry SS-1039F is a soft grad with excellent flexibility and good pigment dispersion.

EST 5510 99 is a Glycerine ester of Gum Rosin.

AFEX™ TG23C is a base drying Oil called as Tung having three conjugated double bonds.

TAFIGEL PUR 85 is designed as an “associative thickener” which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 85 can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. Aqueous gloss paints, thickened with TAFIGEL PUR 85 show minimal pseudoplasticity, similar to the rheology of solvent borne systems. TAFIGEL PUR 85 is recommended for use in following systems: Interior and exterior paints, latex paints, anticorrosive paints, adhesives, and printing inks.

RELEASE WR 2603 is a waterborne release agent based on synthetic acrylic polymers compounded with additives that impart a very high water repellency combined with excellent release properties.

Evermore Chemical Industry SS-150E is a medium hard grade with heat resistance above 200℃ and good hydrolysis resistance.

Vitro Minerals LA-600(1) are functional fillers and extenders produced from clean, post-industrial, glass feedstocks. X-ray diffraction and scanning electron microscopy confirms that the LA Glass calcium aluminosilicate powders are fully amorphous and contain no crystalline silica. The glass chemistry results in relative chemical inertness, making LA Glass resistant to blooming, blistering, or chemical degradation in harsh environments. LA Glass powders enhance a wide range of paints, coatings, plastics, and adhesives. High consistent brightness, tint retention and stain/scrub resistance can be achieved in most paint and coating systems. LA Glass powders have low oil absorption and can be easily dispersed in water- or solvent-based systems. The feedstocks are certified post-industrial and are free from contaminants associated with post-consumer curbside glass.