Products in Building & Construction: Polyamides

UNI-REZ 2672 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2672 hot melt polyamide adhesive has excellent green strength, chemical resistance and adhesion to PVC.

BONTAMIDE 2032 is a fast curing standard hardener for epoxy resin.

UNI-REZ 2228 polyamide resin is a high viscosity, alcohol soluble type resin for use in flexographic printing. Its high molecular weight and fast solvent release makes it ideal for high speed printing and when high chemical and/or abrasion resistance properties are desired.

BONTAMIDE 2038 is a standard hardener for epoxy resin, no amine blush after curing.

AR990 is a blend of expanded Aramid fibers with talc. The high technical properties of expanded Aramid blends provide economical rapid dispersion in compounds. High temperature, high tensile and impact strengths are coupled with chemical resistant high thixotrophy fibers.

UNI-REZ 2248 polyamide resin is an alcohol soluble type resin for flexographic printing. It has high compatibility with nitrocellulose, excellent gel resistance, and excellent moisture tolerance.

BONTAMIDE 2055 is a resin used for floor primer on wet ground bed

UNI-REZ 1533 polyamide resin is a co-solvent type resin which is soluble in alcohols, but typically requires mixtures of aliphatic hydrocarbons and alcohols for gel stability. UNI-REZ 1533 polyamide resin provides fast solvent release, good gel resistance, and excellent grease resistance in flexographic / gravure inks for plastic substrates.

UNI-REZ 2218 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.

BONTAMIDE 2030 is a Standard hardener for epoxy resin.

UNI-REZ™ 2501 is a thermoplastic polyamide resin. Used in high gloss paints. Offers a high degree of thixotropy. Possesses very good flow and leveling characteristics.

BONTAMIDE 2040 is a non-sagging, thixotropic paste, an adhesive to old and new cement.

UNI-REZ 2226 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.

UNI-REZ 106/1 polyamide resin is a co-solvent type resin which is soluble in alcohols, but typically requires mixtures of aliphatic hydrocarbons and alcohols for gel stability. UNI-REZ 106/1 polyamide resin provides fast solvent release and good grease resistance in flexographic / gravure inks for plastic substrates and is especially effective as an overprint lacquer.

UNI-REZ 2632 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2632 hot melt polyamide adhesive has excellent low temperature flexibility and adhesion to various plastic substrates. The low viscosity and moderate softening point allows for lower application temperatures when used with temperature sensitive substrates.

UNI-REZ 2210 polyamide resin is an alcohol soluble / co-solvent type resin with excellent solvent release and blocking properties. UNI-REZ 2210 polyamide resin was developed for release lacquers but can also be used as a modifying resin to improve hardness.

UNI-REZ 2930 polyamide resin is a co-solvent type resin which is soluble in alcohols, but typically requires mixtures of aliphatic hydrocarbons and alcohols for gel stability. UNI-REZ 2930 polyamide resin provides fast solvent release and good grease resistance in flexographic / gravure inks for plastic substrates and is especially effective as an overprint lacquer.

UNI-REZ™ 2502 is a thermoplastic polyamide resin. Used in high-gloss paints. Offers a high degree of thixotropy. Possesses very good flow and leveling characteristics.

Nylacast Nylube was introduced into the Nylacast product rangein 1989 as a logical progression to Oilon with already outstanding performance as a bearing material. Since that time, it has proved to be Nylacast’s supreme wear resisting grade and one of the most important developments from Nylacast in new materials. Nylube contains a combined liquid/solid lubricant system which allows for a coefficient of friction as low as 0.08. This is below that of almost any other polymer available at present.

UNI-REZ 138 polyamide resin is an alcohol soluble type resin of comparatively low viscosity. It has low odor, high gel and water resistance, together with excellent solvent release and blocking resistance. Its high ester tolerance permits addition of small proportions of nitrocellulose without loss of any of these properties.

UNI-REZ™ thermoplastic polyamide adhesives resins bond to a variety of substrates. Kraton’s leading technology position enables a tailored combination of strength, flexibility, environmental resistances, adhesion and open times.

UNI-REZ 2727 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2727 hot melt polyamide adhesive has excellent heat and chemical resistance.

UNI-REZ 111 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.

BONTAMIDE 2080 is a resin which has good adhesive properties, resin mortar.

BONTAMIDE 2010 is a resin which has water resistance and good chemical property.

BONTAMIDE 2050 is a resin which has long pot life, excellent toughness

LOXIAMID PA6 HS1 03001 is an injection molding grade of Polyamide 6 resin.

UNI-REZ™ thixotropic polyamides provide performance well beyond the capabilities of other competing technologies for controlling the rheology of structured non-drip gloss paints and varnishes. Kraton thixotropic grades are non-reactive polyamide resin for use in thixotropic alkyds.

UNI-REZ 2532 (formerly UNI-REZ E3525) thermoplastic polyamide resin is designed to impart a high degree of thixotropy to alkyd resins. Thixotropy can be achieved by reacting UNI-REZ 2532 with the alkyd resin at temperatures between 210-230°C. UNI-REZ 2532 can be easily processed and achieves its clear point on dilution before attainment of maximum thixotropy. UNI-REZ 2532 forms very strong and rigid thixotropic gels that are resistant to high levels of polar solvents.

BONTAMIDE 2031 is an odorless standard hardener for epoxy resin

UNI-REZ 147 polyamide resin is an alcohol soluble / co-solvent type resin offering low temperature gel resistance and good compatibility with modifying resins. UNI-REZ 147 polyamide resin offers better blocking and gloss properties than other modified co-solvent types. It has good solvent compatibility, alcohol reducibility and compatibility to nitrocellulose.

UNI-REZ 2294 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2294 has a moderate softening point and low viscosity which allows for a lower application temperature and fast set.

LOXIAMID PA6 HS1 IM3 03039 is an injection molding grade of Polyamide 6 resin with excellent impact resistance.

UNI-REZ 2940 polyamide resin is a co-solvent type resin which is soluble in alcohols, but typically requires mixtures of aliphatic hydrocarbons and alcohols for gel stability. UNI-REZ 2940 polyamide resin provides fast solvent release and good grease resistance in flexographic / gravure inks for plastic substrates and is especially effective as an overprint lacquer.

Nylacast Moly is a cast nylon material in which improved crystallization occurs by the addition of Molybdenum Disulphide. On account of this the superficial hardness increases (providing excellent machine ability) and simultaneously the general mechanical and anti-friction properties are improved. Due to the fact that the crystal structure breaks down immediately before the melting temperature is reached, the thermal properties of the material are improved over the basic grade.

BONTAMIDE 2070 is a resin which has good adhesive properties, resin mortar.