Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Specific Features
- Addition Curing
- Fast curing at room temperature
- Flowable
- No chemical shrinkage
- Two-component
Applications & Uses
- Markets
- Applications
- Cure Method
- Plastics & Elastomers End Uses
- Applications
- Making molds for (concrete) casting.
- Automotive molding
- Reproduction Molding
- Application Details
- Due to its good resistance to all common reproduction materials. e.g. casting resins, concrete, as well as the superior mechanical properties, CENUSIL® M 820 A/B is especially suitable for all molds of models with extensive undercuts.
- As a low-Shore A addition silicone rubber that cures without undergoing dimensional shrinkage, CENUSIL® M 820 A/B is also suitable if absolutely accurate copies of models are required.
Properties
- Catalyst Properties
Value Units Test Method / Conditions Pot Life (A+B, at 23°C) 40 minutes DIN EN ISO 2555 Mix Ratio (A:B) 1:1 parts by weight - Demoldable (A+B, at 23°C) 4 hours - - Cured Properties
Value Units Test Method / Conditions Tensile Strength 4 N/mm² ISO 37 Type 1 Shore Hardness A 20 Shore A DIN ISO 48-4 Elongation (at break) 500 % ISO 37 Type 1 - Uncured Properties
Value Units Test Method / Conditions Dynamic Viscosity (Component B, at 23°C) 6000 mPa·s ISO 3219 Dynamic Viscosity (Component A, at 23°C) 6000 mPa·s ISO 3219 Density (at 23°C, Componenet B) 1.05 g/cm³ DIN EN ISO 2811-1 Density (at 23°C, Componenet A) 1.05 g/cm³ DIN EN ISO 2811-1 - Properties
- Excellent flowabily
- High tear strength
- Low hardness /Shore A 20)
- Mixing ratio of 1:1 for straightforward processing
- Fast and non shrink cure at room temperature which can be accelerated considerably by application of heat
- Excellent long-term stability of the mechanical properties of the vulcanizate
- Good resistance to common reproduction materials
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Safety & Health
- Safety Notes
Components A and B of the additions-curing grades Silicone Elastomers A contain only constituents that over many years have proved to be neither toxic nor aggressive. Special handling precautions are therefore not required, i.e., only the general industrial hygiene regulations regulations apply.
Packaging & Availability
- Country Availability
- Packaging Type
- Regional Availability
- Packaging Information
- Silicone Elastomers A KG HOBBOCK PE
- Silicone Elastomers A 200 KG DRUM SB
- Silicone Elastomers A 20 KG HOBBOCK SB
- Silicone Elastomers A 200 KG DRUM SB