Agrochemical Ingredient Multifunctional B

PRINCIPAL FUNCTIONING AGENTS  

1. Modified seed oils, C15 –C40 Alkanes, Glucitol Octadecenoate, Polyethoxylated Glucitol derivatives, polydimethylpolysiloxanes   -  100.0%
2. CONSTITUENTS INEFFECTIVE AS SPRAY ADJUVANTS -  0.0%

• TOTAL -  100.0%

• FOR USE WITH PRODUCTS REGISTERED FOR: AGRICULTURAL, FORESTRY, INDUSTRIAL, MUNICIPAL, NON-CROPLAND, ORNAMENTAL, RIGHTS-OF-WAY, AND TURF. NOT FOR AQUATIC USE
• The addition of an adjuvant to some pesticides or pesticide tank mix combinations may cause phytotoxicity to the foliage and/or fruit of susceptible crops. Prior to the addition of Agrochemical Ingredient Multifunctional B to spray tank mixes or prior to the use of Agrochemical Ingredient Multifunctional B with a pesticide or fertilizer, the user or application advisor must have experience with the combination or must have conducted a phytotoxicity trial.
• JUSTIFIED™ may be applied by Ground, CDA, Aerial and other spray application equipment as recommended by pesticide labels. In most applications, a minimum of 1 quart/100 gallons of spray mix, or .25% by volume is recommended. For applications per acre, refer to the chart below:

For spray application mixtures greater than 20 GPA – use 1 Quart of JUSTIFIED™ per 100 gallons.

NOTE: Do not apply this product in such a manner as to directly or through drift expose workers or other persons. Do not spray pesticides if conditions of thermal inversion exist, or if wind direction and speed may cause drift onto adjacent areas. Drift minimization is the responsibility of the applicator. Consult your local and state agricultural authorities for information regarding avoiding or minimizing spray drift. Applicators must follow pesticide label and/or local regulatory authority requirements and recommendations for minimizing spray application drift when using JUSTIFIED™.

CAUTION: Do not mix with oxidizing agents unless oxidizing agents are in solution.

Prior to any pesticide application all spray mixing and application equipment must be cleaned. Carefully observe all cleaning directions of the pesticide(s) label(s). Fill spray tank one-half full with water and begin agitation. Add pesticides as directed by labeling or in the following sequence:

1. Dry flowables or water dispersible granules.
2. Wettable powders
3. Flowables
4. Solutions
5. Emulsifiable concentrates

Add JUSTIFIED™ last and continue agitation. Sound application technology must be followed when spraying pesticides

  AFTER USE

• Spray equipment should be rinsed. Follow all clean-up precautions on label of pesticide used. Follow all recommended governmental procedures for disposal of pesticide spray solutions.