XECARB

Xenia Brand

Supplier:Xenia

Products:45

XECARB® thermoplastic composites family represents the range of products that achieve the highest mechanical features, together with low density and electrical conductivity, by using the carbon fiber as a reinforcement in combination with the thermoplastic composites family represents the range of products properties of the different thermoplastic bases.

View All XECARB Products

XECARB® 11-C20-HP

Polymer Name:Polypropylene Homopolymer (HPP)
Chemical Family:Polypropylenes (PP), Polyolefins
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 11-C20-HP is a 20% carbon fiber reinforced PP

XECARB® 4-C10-XY

Polymer Name:Polyphenylene Sulfide (PPS)
Chemical Family:Polyphenylene Sulfide (PPS)
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 4-C10-XY is a 10% carbon fiber reinforced PPS

XECARB® 6-C30-D11

Polymer Name:Thermoplastic Polyurethane (Polyether based)
Processing Methods:Injection Molding
End Uses:Mountaineering Boots, Structural Parts
Density:1310.0 - 1310.0 kg/m³
Flexural Modulus:12000.0 - 12000.0 MPa
Strain at Break:4.2 - 4.2 %

XECARB® 6-C30-D11 is a 30% carbon fiber-reinforced ether-based TPU

XECARB® 7-C30-D14

Polymer Name:Thermoplastic Polyurethane (Polyester based)
Processing Methods:Injection Molding
End Uses:Mountaineering Boots, Structural Parts
Density:1360.0 - 1360.0 kg/m³
Flexural Modulus:11500.0 - 11500.0 MPa
Strain at Break:7.4 - 7.4 %

XECARB® 7-C30-D14 is a 30% carbon fiber reinforced TPU ester

Polymer Name:Polyamide 66 (PA 66)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 1-C20 is a 20% carbon fiber reinforced PA66

Polymer Name:Polyamide 66 (PA 66)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 1-C30 is a 30% carbon fiber-reinforced PA66

XECARB® 1-C30-P20

Polymer Name:Polyamide 66 (PA 66)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber, PTFE
Processing Methods:Injection Molding

XECARB® 1-C30-P20 is a 30% carbon fiber + 20% PTFE reinforced PA66

Polymer Name:Polyamide 66 (PA 66)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 1-C40 is a 40% carbon fiber reinforced PA66

Polymer Name:Polyamide 66 (PA 66)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 1-C50 is a 50% carbon fiber reinforced PA66

XECARB® 4-C20-XY

Polymer Name:Polyphenylene Sulfide (PPS)
Chemical Family:Polyphenylene Sulfide (PPS)
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 4-C20-XY is a 20% carbon fiber reinforced PPS

XECARB® 4-C30-XY

Polymer Name:Polyphenylene Sulfide (PPS)
Chemical Family:Polyphenylene Sulfide (PPS)
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 4-C30-XY is a 30% carbon fiber reinforced PPS

XECARB® 7-C30-D16-A

Polymer Name:Thermoplastic Polyurethane (Polyester based)
Processing Methods:Injection Molding
End Uses:Mountaineering Boots, Structural Parts
Density:1360.0 - 1360.0 kg/m³
Flexural Modulus:7500.0 - 7500.0 MPa
Strain at Break:10.0 - 10.0 %

XECARB® 7-C30-D16-A is a 30% carbon fiber reinforced TPU ester

XECARB® 12-C20-HT

Polymer Name:Polyphthalamide (PPA)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 12-C20-HT is a 20% carbon fiber reinforced PPA

XECARB® 12-C30-HT

Polymer Name:Polyphthalamide (PPA)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 12-C30-HT is a 30% carbon fiber reinforced PPA

XECARB® 12-C30-P20-HT

Polymer Name:Polyphthalamide (PPA)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber, PTFE
Processing Methods:Injection Molding

XECARB® 12-C30-P20-HT is a 30% carbon fiber + 20% PTFE reinforced PPA

XECARB® 12-C40-HT

Polymer Name:Polyphthalamide (PPA)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 12-C40-HT is a 40% carbon fiber reinforced PPA

XECARB® 12-C50-HT

Polymer Name:Polyphthalamide (PPA)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 12-C50-HT is a 50% carbon fiber reinforced PPA

XECARB® 15-C30

Polymer Name:Polyether Imide (PEI)
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 15-C30 is a 30% carbon fiber reinforced PEI

XECARB® 17-C30-P2

Polymer Name:Polyether Block Amide (PEBA)
Processing Methods:Injection Molding
End Uses:Industrial Applications, Mountaineering Boots, Structural Parts, Gears
Features:Electrically Conductive, Good Mechanical Properties, Good Processability, Low Density
Flexural Modulus:4500.0 - 4500.0 MPa

XECARB® 17-C30-P2 is a 30% carbon fiber reinforced PEBA

XECARB® 17-C30-P3

Polymer Name:Polyether Block Amide (PEBA)
Processing Methods:Injection Molding
End Uses:Industrial Applications, Mountaineering Boots, Structural Parts, Gears
Features:Electrically Conductive, Good Mechanical Properties, Good Processability, Low Density
Flexural Modulus:8500.0 - 8500.0 MPa

XECARB® 17-C30-P3 is a 30% carbon fiber reinforced PEBA

XECARB® 17-C30-P6

Polymer Name:Polyether Block Amide (PEBA)
Processing Methods:Injection Molding
End Uses:Industrial Applications, Mountaineering Boots, Structural Parts, Gears
Features:Electrically Conductive, Good Mechanical Properties, Good Processability, Low Density
Flexural Modulus:1500.0 - 1500.0 MPa

XECARB® 17-C30-P6 is a 30% carbon fiber reinforced PEBA

XECARB® 17-C30-P10-P3

Polymer Name:Polyether Block Amide (PEBA)
Processing Methods:Injection Molding
End Uses:Industrial Applications, Mountaineering Boots, Structural Parts, Gears
Features:Electrically Conductive, Good Mechanical Properties, Good Processability, Low Density
Flexural Modulus:8500.0 - 8500.0 MPa

XECARB® 17-C30-P10-P3 is a 30% carbon fiber reinforced PEBA

XECARB® 18-C30

Polymer Name:High Density Polyethylene (HDPE)
Chemical Family:Polyethylenes, Polyolefins
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 18-C30 is a 30% carbon fiber reinforced HDPE

XECARB® 20-C20

Polymer Name:Polyamide 11 (PA 11)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 20-C20 is a 20% carbon fiber reinforced PA11

XECARB® 20-C30

Polymer Name:Polyamide 11 (PA 11)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 20-C30 is a 30% carbon fiber reinforced PA11

XECARB® 21-C10-AE

Polymer Name:Polyamide 12 (PA 12)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 21-C10-AE is a 10% carbon fiber reinforced PA12

XECARB® 21-C20-AE

Polymer Name:Polyamide 12 (PA 12)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 21-C20-AE is a 20% carbon fiber reinforced PA12

XECARB® 21-C30-AE

Polymer Name:Polyamide 12 (PA 12)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 21-C30-AE is a 30% carbon fiber reinforced PA12

XECARB® 21-C40-AE

Polymer Name:Polyamide 12 (PA 12)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 21-C40-AE is a 40% carbon fiber reinforced PA12

XECARB® 21-C50-AE

Polymer Name:Polyamide 12 (PA 12)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 21-C50-AE is a 50% carbon fiber reinforced PA12

XECARB® 22-C30

Polymer Name:Polyamide 612 (PA 612)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 22-C30 is a 30% carbon fiber reinforced PA6.12

XECARB® 22-C50

Polymer Name:Polyamide 612 (PA 612)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 22-C50 is a 50% carbon fiber reinforced PA6.12

XECARB® 22-C30-P20

Polymer Name:Polyamide 612 (PA 612)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber, PTFE
Processing Methods:Injection Molding

XECARB® 22-C30-P20 is a 30% carbon fiber + 20% PTFE reinforced PA6.12

XECARB® 29-C10

Polymer Name:Polyamide 410 (PA 410)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 29-C10 is a 10% carbon fiber reinforced PA4.10

XECARB® 29-C20

Polymer Name:Polyamide 410 (PA 410)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 29-C20 is a 20% carbon fiber reinforced PA4.10

XECARB® 29-C30

Polymer Name:Polyamide 410 (PA 410)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 29-C30 is a 30% carbon fiber reinforced PA4.10

Knowde Brand Summary

Identification

Chemical Family: Polyamides,
Polycarbonate (PC),
Polyethylenes,
Polyolefins,
Polyphenylene Sulfide (PPS),
Polypropylenes (PP),
Polyurethanes (PU),
Thermoplastic Polyurethanes (TPU),
Vinyls, Vinylics & Vinyl Derivatives
Fillers Included: Carbon Fiber,
PTFE
Polymer Name: High Density Polyethylene (HDPE),
Polyamide 11 (PA 11),
Polyamide 12 (PA 12),
Polyamide 410 (PA 410),
Polyamide 46 (PA 46),
Polyamide 6 (PA 6),
Polyamide 610 (PA 610),
Polyamide 612 (PA 612),
Polyamide 66 (PA 66),
Polycarbonate (PC),
Polyether Block Amide (PEBA),
Polyether Imide (PEI),
Polyphenylene Sulfide (PPS),
Polyphthalamide (PPA),
Polypropylene Homopolymer (HPP),
Polyvinylidene Fluoride (PVDF),
Thermoplastic Polyurethane (Polyester based),
Thermoplastic Polyurethane (Polyether based)
Reinforcement Material: Carbon Fibers
Technologies: Composite Materials,
Elastomers,
Plastics
Product Families: Basic Thermoplastics
Polyolefins
Engineering & Specialty Polymers
High Performance Thermoplastics,
Polyamides,
Polycarbonates
Polymers & Resins
Thermoplastic Resins
Thermoplastic Elastomers
Thermoplastic Polyamide Elastomers (TPE-A),
Thermoplastic Urethanes (TPU)
Composite Materials Functions: Resins, Binders & Matrix Materials
Plastics & Elastomers Functions: Resin

Applications & Uses

Markets: Building & Construction,
Consumer Goods,
Industrial
Applications: Building Materials
Structural Components
Chemical & Industrial Manufacturing
Equipment & Parts
Footwear
Sports & Recreation
Composites End Use: Structural Parts
Plastics & Elastomers End Uses: Gears,
Industrial Applications,
Mountaineering Boots,
Sporting Goods,
Structural Parts
Plastics & Elastomers Processing Methods: Injection Molding

Knowde Brand Highlights

Brand Highlights: XECARB® stands for the family of products that achieves the highest mechanical features, together with low density and electrical conductivity , by using the carbon fiber as a reinforcement in combination with the properties of the different thermoplastic bases.