WACKER® E35 10000

Chemical Industry

In mold release applications, Wacker’s silicone emulsions are normally diluted to 0.5% - 2.5%. However, in a polish or specialty product formulation, the emulsions are normally used in their concentrated form. In most formulations, the type of emulsion used will depend mostly upon the type of product being prepared. For example, a furniture polish formulator should use a silicone emulsion system that provides high gloss and ease of application and rubout. Many times these features are best achieved by blending two emulsions together, such as E35 350 and WACKER® E35 10000, or possibly E35 100 and E35 1000 to get a combination of properties. Normally, a higher viscosity type silicone will give high gloss and durability, while the lower viscosity emulsions are easier to apply and rubout.

• Ease and versatility of application
• Chemical inertness

Under normal warehouse conditions, these emulsions are stable in unopened containers for 12 months. Freezing should be avoided and these emulsions should not be stored above 32°C (90°F).