VINNAPAS® 7016 F

• Defoaming
• Plasticizing effect

One-Component Self-Leveling Compounds

Processing

For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNAPAS® 7016 F with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.

• VINNAPAS® 7016 F is a copolymer powder of vinyl ester, ethylene and acrylate. It is dispersible in water and is also a highly effective superplasticizer with rheological properties similar to those of casein.
• VINNAPAS® 7016 F shows an instant superplasticizing effect and very good self-healing properties in the modified fresh mortar.
• VINNAPAS® 7016 F is ideal for formulating cementitious and gypsum-based flooring systems (e.g. self-leveling flooring compounds). Thereby the rheology of VINNAPAS® 7016 F is especially advantageous for the manual application.
• VINNAPAS® 7016 F contains a fine mineral filler as an antiblocking agent and is produced without the addition of organic solvents, plasticizers and film-forming agents.
• VINNAPAS® 7016 F is a high-quality hard polymeric binder and is also a highly effective superplasticizer with caseinlike rheology. There is no need to add any commercial superplasticizer when 2-3 % VINNAPAS® 7016 F is added to a blend.
• Furthermore it allows self-leveling flooring compounds to be formulated with a low content of volatile organic compounds (VOC). The product thus can be used to produce self-leveling flooring compounds conforming to strict eco-labeling requirements.

25 kg paper bags Big Bags or bulk on request.

During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30°C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received.