Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
SEMICOSIL® 9672 TCis a shear-thinning, non-slump, addition-curing, two part silicone gel that cures at room temperature to a soft gel with excellent thermal conductivity.
- Gap filler rubber, thermal conductivity
- Low stress, soft and tacky
- Low density
- Low volatile
Applications & Uses
- Markets
- Applications
- Application Area
- Cure Method
- Applications
- Automotive Electronics
- Battery
- Electronic Control (ECU) & Power Control Units (PCU) & Sensors
- Thermal Interface Management
Properties
- Physical Form
- Cured Properties
Value Units Test Method / Conditions Flame Rating V-0 - Internal test acc. UL94 Mix Ratio (A:B) 1:1 parts by weight - Shore Hardness 00 60 - 70 - ASTM D 2240 - Uncured Properties
Value Units Test Method / Conditions Density (at 23°C, Componenet A) 2.3 g/cm³ DIN EN ISO 1183-1 A Density (at 25°C, Componenet B) 2.3 g/cm³ DIN EN ISO 1183-1 A Dynamic Viscosity (Component A, at 25°C, Shear rate 1 s⁻¹) 160.000 - 430.000 mPa·s ISO 3219 Dynamic Viscosity (Component B, at 25°C, Shear rate 1 s⁻¹) 130.000 - 380.000 mPa·s ISO 3219 Thermal Conductivity (at 25°C, Component A) 3.2 W/m.K DIN 52612 Thermal Conductivity (at 25°C, Component B) 3.2 W/m.K DIN 52612
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Technical Details & Test Data
- Processing
SEMICOSIL 9672 TC is preferentially processed from hobbock using follower-plate and high pressure feeding technology. Presence of abrasive fillers requires the use of suitable equipment for feeding pumps and dispensing head. Material is non slump, however contains high density fillers. In order to warrant material properties after storage in the hobbock container it is highly recommended to homogenize the content in the hobbock prior to use using a biaxial mixing system. A 3-5 min biaxial shaking process is sufficient to rehomogenize the material in the container.
Packaging & Availability
- Country Availability
- Packaging Type
- Regional Availability
- Packaging
SEMICOSIL® 9672 TC is available in 30kg Hobbocks and 280kg Drums.
Storage & Handling
- Shelf Life
- 6 months
- Storage Conditions
- SEMICOSIL® 9672 TChas a shelf life of at least 6 months when stored between 5 °C and 30 °C in the originally sealed container.
- Prior to use a homogenization of hobbock containers using a biaxial mixing equipment is highly recommended.
- The 'Best use before end' date of each batch appears on the product label.
- Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.