Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Carrier
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Specific Features
Resistant to tracking and erosion.
Applications & Uses
- Markets
- Applications
- Cure Method
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Applications
- Arresters
- Cable Accessories
- Insulators
- Prototyping
- Processing
- Components A and B are delivered ready to use in drums of 20 and 200 liters capacity. They can be pumped by means of standard metering equipment from these drums and mixing in a static mixer straight into the mold.
- The mixing ratio is 9 : 1. The extreme low viscosity and resulting high volumetric flow rate ensure consistent, void-free production at room temperature. Curing at room temperature results in very little inner mold pressure.
- Therefore POWERSIL® 600 A/B is suitable for the production of products with complex installation parts. At room temperature, mixtures of A and B components have a pot life of at least 70 minutes.
- POWERSIL® 600 A/B is also recommended for prototyping of products since no expensive machinery is needed for its processing.
Properties
- Cured Properties
Value Units Test Method / Conditions Arc Resistance min. 300 seconds IEC 61621 Density (at 23°C) 1.13 g/cm³ DIN EN ISO 1183-1 A Dielectric Strength 23 kV/mm IEC 60243-1 Dissipation Factor (tan δ, at 50Hz) 3 x 10⁻⁴ - IEC 62631-2-1 Elongation (at break) 500 % ISO 37 Type 1 Flammability FV-0 - IEC 60695-11-10 Permittivity (at 50Hz) 2.9 - IEC 62631-2-1 Shore Hardness A 30 - DIN ISO 48-4 Tear Strength 22 N/mm ASTM D 624 B Tensile Strength 8 N/mm² ISO 37 Type 1 Tracking Resistance 1A 3.5 - IEC 60587 Volume Resistivity 10¹⁵ Ohm-cm IEC 62631-3-1 - Uncured Properties
Value Units Test Method / Conditions Dynamic Viscosity (of mix, Shear rate 10 s⁻¹) 10000 mPa·s DIN EN ISO 3219 Mix Ratio (A:B) 9:1 parts by weight - Pot Life (at 23°C) 70 minutes - - Properties
- Castable RTV-2
- Ready-to-use, two component system
- Very easy to process due to its low viscosity
- Best suitable for outdoor applications (UV & weathering resistance, excellent hydrophobic properties)
- Note
Cure conditions: 10 min / 100°C in press.
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Packaging & Availability
- Country Availability
- Regional Availability