Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Special Features
- 1-component system
- Electrically insulating
- Flowable
- Good heat stability
- Long shelf life
- Oxime-cure
- Ready to use
Applications & Uses
- Markets
- Applications
- Application Area
- Cure Method
- Applications
Insulator Coatings
- Application Details
- Protective silicone sealant, designed especially for cable jointing applications.
- In the absence of moisture POWERSIL® 590 remains liquid for a long time. Thus the generation of voids is prevented.
Processing
- POWERSIL® 590 is preferably applied by casting. Material cures under the influence of moisture.
- Make sure that the shell does not contain any water before casting. Keep container tightly closed until usage.
Properties
- Cured Properties
Value Units Test Method / Conditions Dielectric Strength (1mm sheet) min. 23 kV/mm IEC 60243 Dissipation Factor (tan δ) 3 x 10⁻⁴ - IEC 60250 Permittivity 2.9 - IEC 60250 Skin Formating Time (at 23°C, 50% r.h) 120 minutes - Specific Gravity 0.98 g/cm³ ISO 2781 Viscosity (at 23°C, Shear rate 0.5 s⁻¹) 9000 - ISO 3219 Volume Resistivity 10¹⁵ Ohm-cm IEC 60093 - Properties
- Low viscosity allows easy casting
- Primerless adhesion
- Note
Cure conditions: 14d / 23°C / 50% relative humidity for cured properties.
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Shelf Life
- 24 Months
- Storage Information
The shelf life of POWERSIL® 590 is up to 24 months when stored between 0 °C and 35 °C in the originally sealed container.