Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Special Features
Steam resistant
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Applications
- Dairy & Food Applications
- Household Applications
- Molded Parts
- Application Details
- ELASTOSIL R 755/60 OH is suitable both for extrusion of tubings and profiles and for compression, transfer and injection molding.
- Although most silicone rubbers show good resistance to boiling water, they degrade rapidly when subjected to superheated steam at temperatures of 160 °C and above (corresponding to 6 bar pressure).
- ELASTOSIL® R 755/60 OH resists steam at a temperature of 160 °C for over 2 months.
Properties
- Cured Properties
- Steam Resistance Properties
- Note
Cure conditions (post-cured 4 h / 200 °C) for cured properties:
- 1.5 % ELASTOSIL® AUX Crosslinker E (50% paste of bis-(2,4-dichlorobenzoyl)-peroxide in silicone fluid); 10 min / 135°C in press.
- 0.7 % ELASTOSIL® AUX Crosslinker C1 (Dicumylperoxide); 15 min /165 °C in press.
After steam immersion (1500 h / 140 °C in autoclave):
- Cure conditions: 0.7 % ELASTOSIL® AUX Crosslinker C1 (Dicumylperoxide), 15 min / 165 °C in press, post-cured 4 h / 200 °C for steam resistance properties.
Value | Units | Test Method / Conditions | |
Compression Set (Curing Agent C1, at 22 hours, 175°C) | 16 | % | DIN ISO 815-1 type B method A |
Compression Set (Curing Agent E, at 22 hours, 175°C) | 65 | % | DIN ISO 815-1 type B method A |
Density (Curing Agent C1) | 1.18 | g/cm³ | DIN EN ISO 1183-1 A |
Density (Curing Agent E) | 1.18 | g/cm³ | DIN EN ISO 1183-1 A |
Elongation (at break, Curing Agent C1) | 300 | % | ISO 37 Type 1 |
Elongation (at break, Curing Agent E) | 280 | % | ISO 37 Type 1 |
Rebound Resilience (Curing Agent C1) | 53 | % | ISO 4662 |
Rebound Resilience (Curing Agent E) | 52 | % | ISO 4662 |
Shore Hardness A (Curing Agent C1) | 61 | - | DIN ISO 48-4 |
Shore Hardness A (Curing Agent E) | 60 | - | DIN ISO 48-4 |
Tear Strength (Curing Agent C1) | 14 | N/mm | ASTM D 624 B |
Tear Strength (Curing Agent E) | 13 | N/mm | ASTM D 624 B |
Tensile Strength (Curing Agent C1) | 7.8 | N/mm² | ISO 37 Type 1 |
Tensile Strength (Curing Agent E) | 9.6 | N/mm² | ISO 37 Type 1 |
Value | Units | Test Method / Conditions | |
Elongation (at break) | 160 | % | ISO 37 |
Shore Hardness A | 73 | - | DIN ISO 48-4 |
Tensile Strength | 5.4 | N/mm² | ISO 37 |
Volume Change | 1.3 | % | - |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability
- Packaging Information
This product is available in 20 kg and 540 kg cardboard packaging.
Storage & Handling
- Storage Information
Please store the cardboard boxes in a dry and cool place. Already opened boxes should be closed again to avoid any contamination.