Knowde Enhanced TDS
Identification & Functionality
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Markets
- Compatible Substrates & Surfaces
- Applications
- Cure is accomplished by simply mixing equal parts (1:1) by weight of part A and part B. Oven cure at 150 C-200°C (302 F- 392°F) for one to six minutes, depending on oven, coating thickness and type of fabric used.
- Curing may be retarded and prevented by nitrogen compounds such as amines and amides, sulfur compounds, anti-aging additives and other additives in rubbers and plastics. Therefore, a materials compatibility test is always recommended.
- Distinguishing Features ELASTOSIL® LR 6294 A/B when fully cured at recommended conditions is suitable for FDA requirements for 21 CFR 175.300.
Properties
- Catalyst Properties
- Cured Properties
- Uncured Properties
- Properties
- 100% solids
- Good adhesion
- High tensile strength and elongation
| Value | Units | Test Method / Conditions | |
| Dynamic Viscosity (A+B, at 25°C) | 40000 | cPs | - |
| Pot Life (A+B, at 25°C) | 2 | days | - |
| Value | Units | Test Method / Conditions | |
| Elongation (at break) | min. 350 | % | ASTM D 412 |
| Shore Hardness A | 25 - 35 | - | ASTM D 2240 |
| Specific Gravity (at 25°C) | 1.1 | g/cm³ | - |
| Tear Strength | min. 45 | N/mm | ASTM D 624, Die B |
| Tensile Strength | min. 500 | N/mm² | ASTM D 412 |
| Value | Units | Test Method / Conditions | |
| Dynamic Viscosity (Component A, at 25°C) | 30000 | cPs | - |
| Dynamic Viscosity (Component B, at 25°C) | 60000 | cPs | - |
Packaging & Availability
- Country Availability
- Regional Availability