Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Carrier
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Specific Features
- Coating
- Flowable
- Good adhesion to metals, glass and ceramics
- Low viscosity
- One-component
- Ready to use
- Solvent-free
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
- Cure Method
- Applications
Industrial Assembly
- Application Details
ELASTOSIL® E11 TRANSPARENT cures at room temperature under the influence of atmospheric moisture. The fully cured material typically shows good primerless adhesion to many substrates. We recommend to run preliminary tests to optimize conditions for the particular application. Perfectly suited for lamination, coating and thin film potting as the material reliably fills small gaps and voids thanks to it’s self leveling properties.
Properties
- Color
- Typical Properties
Value Units Test Method / Conditions Curing Time (at 23°C, 50% RH) 12 h/mm - Skin-forming Time (at 23°C, 50% RH) 15 - 25 min - - Cured Properties
Value Units Test Method / Conditions Density (at 23°C) 1.11 g/cm³ DIN EN ISO 1183-1 A Recommended Service Temperature -45 to 180 °C - Elongation (at break, Type 3, 23°C, 2mm) 275 % ISO 37 Shore Hardness A 26 - DIN ISO 48-4 Tensile Strength (Type 3, at 23°C, 2mm) 2.1 N/mm² ISO 37 - Uncured Properties
Value Units Test Method / Conditions Dynamic Viscosity (at 25°C, Shear rate 0.5 s⁻¹) 10000 mPa·s ISO 3219 Dynamic Viscosity (at 25°C, Shear rate 25 s⁻¹) 8000 mPa·s ISO 3219 Skin Formating Time (at 23°C, 50% r.h) 20 minutes - Skin Formating Time (at 23°C, 50% r.h) 10 minutes - - Properties
- Low viscous acetoxy-cure silicone
- Translucent
- Solventless
- Excellent primerless adhesion to many substrates
- Very good mechanical properties
- Good adhesion to HCR without priming
- Recommended service temperature from -45 °C to +180°C
- max. recommended short term peak temperature exposure 200°C
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Packaging & Availability
- Country Availability
- Regional Availability