Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts

ANCHORSEAL® Classic

ANCHORSEAL® Classic is a wax emulsion end sealer that protects freshly cut logs and lumber from damaging end splits while air drying. ANCHORSEAL can be used on hardwood and softwood logs and lumber to protect against degradation.

Brand: ANCHORSEAL (2 products)

Product Type: Sealer

Compatible Substrates & Surfaces: Wood

Features: Good Stability, Stain Resistant

Application Method: Brush, Roller, Spray

Chemical Family: Waxes

Technical Data SheetSafety Data Sheet

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Chemical Family
Waxes
Product Type
Sealer
Technologies
Ready-to-Use Products
Product Families
Ready-to-Use Products — Paints & Coatings
Primers & Sealers

Features & Benefits

Labeling Claims
Non-Hazardous
Ready-to-Use Product Features
Good Stability,
Stain Resistant
Features
  • Prevents up to 90% of end checks and drying splits
  • Can be applied to all species of hardwood or softwood
  • Helps prevent blue stain and sapstain caused by damaging fungi
  • Water based, non-toxic formula
  • Available in clear or more than 35 colors
  • Winterized formulas available

Applications & Uses

Markets
Building & Construction,
Paints & Coatings
Applications
Paints & Coatings — Building & Construction
Wood Coatings & Finishes
Building & Construction — Building Materials
Wood
Application Method
Brush,
Roller,
Spray
Compatible Substrates & Surfaces
Wood
Applications

Surface Preparation

  • All areas to be coated should be clear of dirt and debris

Application

  • Apply ANCHORSEAL using a brush, roller or sprayer until it begins to drip slightly
  • For optimal coverage, use a gas engine, electric, air operated or backpack sprayer from U·C Coatings
  • If using spray equipment other than those sold by U·C Coatings, use 0.21”/0.55 mm tip or larger
  • Logs larger than 24”/60 cm in diameter will require a heavier coating, or two coats must be applied within a 15 minute period

Properties

Physical Form
Emulsion,
Liquid
Typical Properties
ValueUnitsTest Method / Conditions
pH Value8 - 9--
lbs/gal7.9--
Specific Gravity0.95--
Viscosity4000cps-
Application Temp.10 - 32.2°C-

Safety & Health

Precautions

Contains no toxic or hazardous materials

Safety Precautions

  • Wear vinyl gloves and eye protection.
  • Avoid breathing in spray. If inhaled, move to fresh air.
  • Avoid contact with eyes. If splashed into eyes, rinse with clean water for 15 minutes.
  • If skin irritation occurs, wash area with soap and water.
  • If accidentally ingested, immediately drink 2 glasses of water and contact a physician. Do not induce vomiting.
  • In case of accidental overexposure, seek medical help

Packaging & Availability

Packaging Type
Cans,
Drums,
Pails,
Totes (IBC)
Freight Class
55
Packaging Information

Available in clear or more than 35 colors.

Packaging Sizes

  • 1 Quart Can
  • 1 Gallon Can
  • 5 Gallon Pail
  • 55 Gallon Drum
  • 275 Gallon Tote

Coverage

  • 100 sq. ft./gallon, depending on application method and wood species

Storage & Handling

Cleanup & Storage

Clean application equipment using hot soapy water.

Store unused ANCHORSEAL above 50°F/10°C to prevent freezing. Winterized formulas will protect against freeze damage