Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Agrochemical Functions
- Technologies
- Product Families
Applications & Uses
- Markets
- Applications
- Application
- Soil: Apply 1-2 gals CropMaster®SuperHume® with sufficient water to cover per 1 acre. Broadcast directly onto soil at pre- planting. For best results incorporate into the top 1-2 inches of soil.
- Row Crops : Mix 1-2 quarts CropMaster®SuperHume® with sufficient water to cover per acre. Mist tops and bottoms of leaves. Moisten only to the point of run-off. (Use a minimum of 5 gallons of water)
- Tree Crops: Mix 2-4 quarts CropMaster®SuperHume® with sufficient water to cover per acre. Mist tops and bottoms of leaves. Moisten only to the point of run-off. (Use a minimum of 50 gallons of water.) Repeat in a regular foliar feed program.
- Gardens/ Potted Plants / Trees / Shrubs : Mix 2-3 oz to each gallon of water. Apply solution around root zone of existing plants: Water in just enough to soak the root zone, (up to 4 inches for most). Apply every time you apply fertilizer or every two weeks.
- Greenhouse : Using a 1% mix ratio (IE 2 quarts for 50 gallon) water over plants until it soaked into the ground. (1-2 inches) For hydroponics: Use at 250 PPM.
- Turfgrass /Garden Soil : Apply 1 quart per 5000 ft. and apply directly after a dry fertilizer application. Commercial Turf application at 2% solution mix.
Properties
- Physical Form
- Typical Properties
Value Units Test Method / Conditions Humic Acid/Fulvic Acid 12 % - Humic Acid 8 % - Fulvic Acid 4 % -
Safety & Health
- Cautions
- Due to the nature of humic and fulvic acid care should be taken when mixing with Calcium and phosphate liquid products.
- Always do a jar compatibility test before mixing any two products other than water in your tanks.
Storage & Handling
- Storage
Keep container sealed tightly when not in use. Do not expose to sunlight for long periods of time. Store in temperatures between 5 °C (41 °F) and 25 °C (77 °F).