Products

EpoxyGrip® 2000 is used as an intermediate or topcoat over zinc rich primers for highly corrosive environments. Where exterior color fastness is required EpoxyGrip 2000 may be top-coated with polyurethane finishes. Used on structural steel, steel tanks, offshore platforms, barges, refineries, petrochemical plants, power plants, railcars, pulp & paper mills, masonry surfaces and other areas as recommended. EpoxyGrip 2000 may be used as a surface tolerant single coat system in mild duty applications.

ZincGard® 1500 is a rapid recoat primer that provides excellent corrosion protection and undercutting protection. Excellent for use in industrial, coastal, marine and freshwater environments. May be used on structural steel, steel tanks, offshore platforms, barges refineries, petrochemical plants, power plants, railcars, pulp & paper mills and other areas as recommended. May also be used to field touch-up inorganic zinc and/or provide galvanic protection for properly prepared steel substrates.

EpoxyGrip® 2005 is a high build, direct to metal epoxy to be applied as a one or two oat system for the exterior of tanks. Used on structural steel, steel tanks, offshore platforms, barges, refineries, petrochemical plants, power plants, railcars, pulp & paper mills, masonry surfaces and other areas as recommended. EpoxyGrip 2005 may be used as a surface tolerant single coat system in mild duty applications.

AquaGrip® 2600 Grout is used as a concrete patching and resurfacing compound in preparation for the concrete to receive a topcoat.

EpoxyGrip® 2900 is used as a rapid recoat high build primer to provide excellent corrosion protection for steel substrates. Designed to be used in interior and exterior heavy-duty service in corrosive, industrial atmospheres. Excellent for use on structural steel, steel tanks, barges, refineries, petrochemical plants, power plants, railcars, pulp & paper mills and others as recommended. Used as a shop primer for OEM applications.

ZincGard® 1000 is a spray applied galvanizing, pure zinc coating that provides near permanent corrosion protection of steel as documented by the Federal Highway Administration. This technology has provided 25+ years documented field protection by the Federal Highway Administration. ZincGard 1000 is excellent for application in industrial plants, costal, marine, offshore, and freshwater environments. Used for structural steel, steel tanks, offshore platforms, barges, refineries, power plants, railcars, pulp & paper mills and other areas as recommended. May also be used untopcoated for long-term corrosion protection as well as a tank lining for solvent immersion service.

EpoxyGrip® 2330 is used as a universal primer over marginally prepared steel substrates and as a bonding (tie) coat over old existing, aged coatings. The outstanding wetting characteristics of EpoxyGrip 2330 allows the coating to penetrate tightly adherent rust and voids in existing coatings to yield a sound base for a wide variety of fresh topcoats. Being solvent free, edges of existing coatings are not lifted thus reducing undercutting and peeling of the existing coating. Excellent for use as a tie coat over existing coatings, as well as over rusted and pitted steel surfaces. Excellent for use on structural steel, steel tanks, barges, water tanks, refineries petrochemical plants, power plants, railcars, pulp & paper mills and others as recommended. Acceptable for drywall substrates.

ZincGard® 1500 VOC is a rapid recoat primer that provides excellent corrosion protection and undercutting protection. Excellent for use in industrial, coastal, marine and freshwater environments. May be used on structural steel, steel tanks, offshore platforms, barges refineries, petrochemical plants, power plants, railcars, pulp & paper mills and other areas as recommended. May also be used to field touch-up inorganic zinc and/or provide galvanic protection for properly prepared steel substrates.

EpoxyGrip® 2000 VOC is used as an intermediate or topcoat over zinc rich primers for highly corrosive environments. Where exterior color fastness is required EpoxyGrip 2000 VOC may be top-coated with polyurethane finishes. Used on structural steel, steel tanks, offshore platforms, barges, refineries, petrochemical plants, power plants, railcars, pulp & paper mills, masonry surfaces and other areas as recommended. EpoxyGrip 2000 VOC may be used as a surface tolerant single coat system in mild duty applications.

RailGard® 2040 VOC is a high build, direct to metal epoxy to be applied as a single coat system for the exterior of railcars.

EpoxyGrip® 2300 is used as a universal primer over marginally prepared steel substrates and as a bonding (tie) coat over old existing, aged coatings. The outstanding wetting characteristics of EpoxyGrip 2300 allows the coating to penetrate tightly adherent rust and voids in existing coatings to yield a sound base for a wide variety of fresh topcoats. Being solvent free, edges of existing coatings are not lifted thus reducing undercutting and peeling of the existing coating. Excellent for use as a tie coat over existing coatings, as well as over rusted and pitted steel surfaces. Excellent for use on structural steel, steel tanks, barges, water tanks, refineries petrochemical plants, power plants, railcars, pulp & paper mills and others as recommended. Acceptable as a primer for drywall substrates.

AquaGrip® 2600 is used as an intermediate or topcoat over zinc rich primers for highly corrosive environments. Where exterior color fastness is required AquaGrip 2600 may be top-coated with polyurethane or acrylic finishes. Used on structural steel, steel tanks, offshore platforms, barges, refineries, petrochemical plants, power plants, railcars, pulp & paper mills, masonry surfaces and other areas as recommended. AquaGrip 2600 may be used as a surface tolerant single coat system in mild duty applications. Acceptable for drywall substrates.