Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts

Tiodize Z-329

Z-329 is a single component, water base coating formulated to inhibit corrosion. This hard film, water-dispersing coating is designed specifically for application on the interior and exterior surfaces of the fuselage, wing, empennage and other areas, where corrosion from water and condensation have been a traditional threat. Z-329 is a non-flammable, fast drying coating with excellent adhesion that penetrates to protect fasteners, joints and faying surfaces. Unlike wax or oils, Z-329 is environmentally safe and can be sprayed "on-line" with a high volume, low pressure spray unit, and without the need of a spray booth. Z-329 can be applied after all other customer finishes, specification primers, top coats and sealants have been applied and cured.

Product Type: 1K (1 component) Coating, Waterborne Coating

Features: Corrosion Resistant, Cost Effective, Fast Drying, Good Adhesion, Light Weight, Low VOC, Water-based, Wide Temperature Operating Range

Application Area: Fasteners

Application Method: Spray

Technical Data Sheet

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Product Type
1K (1 component) Coating,
Waterborne Coating
Technologies
Ready-to-Use Products
Product Families
Ready-to-Use Products — Paints & Coatings
Protective Coatings

Features & Benefits

Labeling Claims
Environmentally Friendly,
Non-Flammable
Ready-to-Use Product Features
Corrosion Resistant,
Cost Effective,
Fast Drying,
Good Adhesion,
Light Weight,
Low VOC,
Water-based,
Wide Temperature Operating Range
Advantages
  • Non-flammable, low VOC.
  • Prevents corrosion.
  • Fast drying, good adhesion.
  • Lightweight (2.28g/ft²/mil).
  • Dry to the touch, easy to vacuum.
  • Passes 5000 hrs. salt fog test.
  • Easy to apply and inspect and re-apply.
  • Penetrates to protect fasteners, joints and faying surfaces.
  • Temperature range of -65°F to +350°F without cracking.
  • Good film forming in closed cavities and open surfaces.
  • Non-cracking film to meet stress and fatigue demands.
  • Will displace water on surfaces affected by condensation, rain water, or remaining water from cleaning.
  • Greater cost savings.

Applications & Uses

Markets
Automotive & Transportation
Applications
Automotive & Transportation — Coatings & Finishes
Aerospace Coatings
Automotive & Transportation — Transportation
Aerospace & Aviation
Application Area
Fasteners
Application Method
Spray

Properties

Physical Properties
  • Z-329 is a single component, water base coating.
  • Z-329 has a low Volatile Organic Compound (VOC) level of less than 100 grams per liter.
  • Z-329 will dry within 60 minutes (dry to the touch in 30 minutes).
  • Z-329, when applied at a coating thickness of 1.0 mil, will cover approximately 800 square feet per gallon of material.
  • Z-329 has been approved by Boeing Industrial Hygiene and Safety Services (IH&S) and Fire Services to be sprayed "on-line".
  • Z-329 can be applied with conventional or High Volume Low Pressure (HVLP) spray equipment.
  • Z-329 should be applied to a coating thickness of 0.5 to 1.0 mil (0.0005 to 0.001 inches).
  • Z-329 passes 5000 hrs. salt fog test at 1.0 mil thickness on aluminum.

Regulatory & Compliance

Approvals

• Z-329 is approved to DMS 2414 (Ref. DAC Test Report No. 18415) - Boeing Commercial Airplanes, Long Beach Division.
• Z-329 meets requirements of BMS 3-29 - Boeing Commercial Airplanes, Long Beach Division.