Advancene - bEE-4909-AAH - ETHYDCO - HDPE - Extrusion

Enhanced TDS

Materials Features: Bimodal Molecular Weight Distribution,
Good Drawdown,
Good Processability,
Good Toughness
Product Characterestics: Its high molecular weight. bimodal molecular wetght distnbuuon and optimum density results in films with high strength, high ngldlty and
excellent processabillty. Tubular films of bEE-4909-AAH resm are recommended for tugh strength grocery sacks. shopping bags and other thin film applications. The combination of strength,toughness and drawdown makes this restn Ideal for downgauging in many applications.
Films are readily treated and pnnt«f to gwe high-quality graptucs. resin is compatible with color concentrates. thus permitting the prcxluctlon of a variety of colored films that serve as protective and attractive decorative wraps.
Main characterestics: • Hexene High Density Resin.
• Bimodal Molecular weight distribution.
• High film strength.
• Excellent processability and drawdown.

Markets: Printing & Packaging
Applications: Printing & Packaging — Packaging
Industrial & Transport Packaging,
Non-Food Consumer Packaging
Plastics & Elastomers End Uses: Heavy Duty Bags
Plastics & Elastomers Processing Methods: Extrusion,
Film Extrusion

Physical Properties

Thermal Properties


	Value	Units	Test Method / Conditions
Melting Temperature (DSC)	130	ºC	univation Method (ASTM D3418. ISO 3146)

Film Properties


	Value	Units	Test Method / Conditions
Film Thickness	12.7	µm	-
Film Puncture Energy	0.94	J	-
Tensile Strength at MO: Yield 0600 mil (127 µm)	32	Mpa	ASTM D882
Tensile Strength at TD Yield 0.500 mil (12.7 µm)	30	Mpa	ASTM D882
Tensile Strength at MD Break, 0600 mil (127 µm)	71	Mpa	ASTM D882
Tensile Strength at Break. 0.500 mil (12.7 µm)	68	Mpa	ASTM D882
Tensile Elongation MO: Break, 0600 mil (121 µm)	350	%	ASTM D882
Tensile Elongation TO. Break. 0600 mil (127 µm)	350	%	ASTM D882
Tensile Elongation Dart Drop Impact (0600 mil (12.7 µm))	260	g	ASTM 1709A, ISO 7765
Elrnendorf Tear Strength at MD: 0.500 mil (127 µm)	11	g	ASTM 1922. ISO 6383-2
Elrnendorf Tear Strength at TD mil (12 7µm)	24	g	ASTM 1922. ISO 6383-2

Processing Information (Extrusion)


	Value	Units	Test Method / Conditions
Melt Temperature	200-215	ºC	-

Recycling: The product is suitable for recycling using modern methods of shredding and cleaning. In-house production waste should be kept clean to facilitate direct recycling.

Extrusion Notes: Fabrication Conditions for Blown Film:
• Screw Size: 50mm); 21:1 ratio LID
• Screw Type: GrCH)ved
• Die Gap: 1.5 mm
• Output:14 kgs/hr/mm Of die circumference
• Die Diameter. 120 mm
• Blow-Up Ratio: 4 to 1
• Screw Speed: 97 rpm
• Frost Line Height: 960 mm

Safety: The product is not classified as a hazardous mixture. Dust and fines from the product carry a nsk of dust explosion. All equipment should properly earthed.
Inhalation of dust should be avoided as it may cause irritation of the respiratory system. Small amounts of fumes are generated during processing of the pr(Hluct. Proper ventilation is therefore required.

Packaging Type

Super Sacks

Regional Availability

Availability

This product is supplied in 25 kg bags in secured pallets of 60 bags (1.500 MT net). It is also supplied in jumbo bags of 1000 kg capacity.

Storage: The product should stored in dry conditions at temperatures 500C and protected from UV-liqht. Improper storage can initiate degradation, which results in odor generation and color changes and can have negative effects on the physical properties of this product.