Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Carrier
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
- Composition
appr. 59 % phthalate resin
appr. 41 % peanut oil fatty acid (triglyceride)
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
- Cure Method
- Uses
Nitrocellulose wood finishes with especially good body; good solvent evaporation and
sandability; colorless and pigmented acid-curing wood finishes in combination with urea
resins.
Properties
- Typical Properties
Value Units Test Method / Conditions Non Volatile Content 60 w % AV-F-F003 Acid Value max. 10 mg KOH/g - Color Value (Iodine) Max. 5 - - Density approx. 1.01 g/ml AV-F-0D001 Flash point approx. 28 °C AV-F-f006 Flow Time 90-110 sec AV-F-V003
Technical Details & Test Data
- Film Properties and Processing
Synthalat E 405, a very low viscosity non-drying alkyd resin, is primarily intended for the
manufacture of full bodied wood and furniture coatings based on nitrocellulose. The rapid
solvent evaporation of these types of nitrocellulose-Synthalat E 405 lacquers is a special
characteristic which meets the higher demands of machine processing. Quickly sandable
coatings have a very fast sandability when suitable zinc sterate types are incorporated that also
meets the requirements of automatic sanding machines.
In topcoats Synthalat E 405 gives paint films a very high gloss and surface hardness and very
good body. In addition, these types of coatings have a very good light stability, so that
Synthalat E 405 can also be used for the coating of lighter species of wood.
Synthalat E 405 is also very suitable for the manufacure of acid curing wood finishes. In this
case it is combined with unplasticized urea or melamine resins in a ratio of 6:4 to 7:3. All
common dilute acids or acid salts can be used as the catalyst.
Packaging & Availability
- Supplied AS
A = 60 % in xylene
B = 75 % in butyl acetate