Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Reinforcement Form
- Reinforcement Material
- Composite Materials Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Composites End Use
- Composites Processing Methods
- Use
This mat is specifically designed for the infusion process and has outstanding flow characteristics. This product can be used as reinforcement and/or as a resin flow media between layers of fabric reinforcement. This mat can also be used in limited applications in Matched Metal Die Molding, RIM and SRIM where a deep draw is not required.
Properties
Regulatory & Compliance
- Chemical Inventories
Technical Details & Test Data
- Product Acceptance Limits & Test Methods
Weight Per
Square Foot
(Ounces)Nominal Individual
(Grams)Calculated Weight
Per Square Meter
(Grams)Test Method 0.75 21.3 229.3 W-01Fc 1 28.4 305.7 1.25 35.4 381 1.5 42.5 457.5 1.75 49.6 533.9 2 56.7 610.3 2.25 63.8 686.7 2.5 70.9 763.2 3 85.1 916 WEIGHT - Values stated are based on 12" x 12" or 30.48 cm x 30.48 cm test specimens
Weight Per Square Foot (Ounces) Approximate Weight Per Square Meter (Grams) Nominal Indvidual (Grams) Test Method 0.75 229.3 3.6 W-01-Fg-T 1 305.7 4.8 1.25 381 6 1.5 457.5 7 1.75 533.9 8.2 2 610.3 9.4 2.25 686.7 10.6 2.5 763.2 11.8 3 916 14.2 IGNITION LOSS (%) - Values stated are based on 12" x 12" or 30.48 cm x 30.48 cm test specimens.
Weight Per Square Foot (Ounces) Nominal Test Method All 2.5 W-05Ec TENSILE - Values stated are based on 12" x 12" or 30.48 cm x 30.48 cm test specimens.
Weight Per
Square Foot
(Ounces)Approximate
Weight Per Square
Meter (Grams)Minimum
Individual (Pounds)Minimum
Individual
(Newtons)Maximum
IndividualTest Method 0.75 229.3 5 22.24 None S-01AG 1 305.7 5 22.24 None 1.25 381 10 44.48 None 1.5 457.5 16 71.17 None 1.75 533.9 21 93.41 None 2 610.3 25 111.2 None 2.25 686.7 28 124.55 None 2.5 763.2 31 137.89 None 3 916 38 169.03 None Width:
Weight Nominal (Inches) Test Method All As specified on the order D-03Aa - Minimum Recommended Laminate Thickness
Weight Per Square
Foot (Ounces)Minimum Laminate
Thickness (Inches)*Minimum Laminate
Thickness (Millimeters)*Test Method 0.75 0.06 1.524 Suitable Micrometer
1 0.06 1.524 1.25 0.06 1.524 1.5 0.06 1.524 1.75 0.06 1.524 2 0.06 1.524 2.25 0.06 1.524 2.5 0.08 2.032 3 0.08 2.032 *If the minimum laminated thickness recommended for a given weight exceeds the thickness designed in the customer’s product, the customer is urged to contact the appropriate Superior Huntingdon Composites sales representative for technical advisement prior to production.
- Preparation for Shipment
Approximate Full Roll Weight and Length:
Weight Per
Square Foot
(Ounces)Approximate Full
Weight
(Pounds)Approximate Full
Weight
(Kilograms)Approximate Full
Roll Length
(Meters)Approximate Full
Roll Length
(Feet)0.75 3.49 x inches of mat width 0.624 x cm of mat width 281 922 1 3.13 x inches of mat width 0.559 x cm of mat width 183 600 1.25 2.77 x inches of mat width 0.495 x cm of mat width 130 426 1.5 3.07 x inches of mat width 0.548 x cm of mat width 120 393 1.75 3.17 x inches of mat width 0.566 x cm of mat width 106 348 2 3.27 x inches of mat width 0.584 x cm of mat width 96 314 2.25 3.29 x inches of mat width 0.587 x cm of mat width 86 281 2.5 3.37 x inches of mat width 0.602 x cm of mat width 79 259 2.75 3.44 x inches of mat width 0.614 x cm of mat width 73 240 3 3.48 x inches of mat width 0.621 x cm of mat width 70 223 ROLL-UP & TELESCOPING REQUIREMENTS
The mat is wound on a 4" (10.2 cm) inside-diameter paper tube, having a single tube with a length equal to the roll width the tube length
tolerances are plus 0", minus 2" (-5.08 cm).
*The mat will be so wound that the maximum length of mat telescoping will not exceed 1/2” (1.27 cm). Telescoping is described as the
condion where successive wraps of mat are not perfectly aligned one upon the other, bringing about a concave effect on one end of the
roll and a convex effect on the other.
No tube will protrude past the product.
ROLL DIAMETER- Domesc ≤ 84” Width: Full rolls are manufactured to a diameter range of 19" (48.26 cm) to 23" (58.42 cm).
- Export ≤ 84” Width: Full rolls are manufactured to a diameter range of 19" (48.26 cm) to 22" (55.88 cm).
- All > 84” Width: Full rolls are manufactured to a diameter range of 19" (48.26 cm) to 22" (55.88 cm).
Note: A maximum of one (1) roll per pallet may be under 19" (48.26 cm), but not less than 9" (22.86 cm), for > 84” width it shall be on the
top roll of the skid.
CONTINUOUS LENGTH ROLLS
All rolls will be continuous, one-piece lengths with no wrap-ins permitied.
Packaging & Availability
- Packaging Type
- Available Products
Weight Trimmed Width Available Standard Weights * Available Standard Widths * Oz /Sq. Ft. G/m² Inches Centimeters 1 300 42 106.7 1.5 450 48 121.9 2 600 50 127 2.5 750 51 129.5 3 900 55 139.7 68 172.7 72 182.9 *All combination of non-standard weights and widths may be available with prior approval of the product engineer.
- Standard Packing Method
WRAPPING
The rolls are wrapped in polyethylene.
PACKAGING
The rolls are multiple packed, twelve (individual or common) rolls for widths less than or equal to 42” (106.68 cm) or six (individual or common) rolls for other widths up to 84” (213.36 cm), on a 66” (167.64 cm) x 44” (111.76 cm) varying height pallet. Greater than 84” (213.36 cm) are on a 116” (294.6 cm) x 44” (111.76 cm) varying height pallet. Also, may be heat treated or block.
Product Identification
A content label will adequately identify each roll.
PALLETIZATION
The rolls of mat will be palletized with pallet stretch packaging.