Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Applications
Low and medium-density foam blocks made from sunpor®A243 are used as thermal insulation boards for construction applications without special requirements concerning flame resistance, or for packaging applications.
Properties
- Physical Form
- Typical Properties
Value Units Test Method / Conditions Density Range 9 - 15 kg/m3 - Granulate Geometry Bead-shaped granulate - - Typical Granulate Diameter (min. 95% by weight) 1.0 - 1.6 mm - Pentane Content (at the time of packaging) min. 5.0 % - Water Content (at the time of packaging) max. 0.4 % -
Technical Details & Test Data
- Processing
Pre-expansion
With discontinuously operating, state-of-the-art preexpanders sunpor® A243 can be pre-expanded to densities of approx. 14 kg/m³. Lower densities can be achieved by double or triple pre-expansion. sunpor® A243 has been treated with an antistatic agent to prevent a build-up of electro-static charge during transport.
Intermediate aging
Intermediate aging should be between 10 and 48 hours
Molding:
sunpor® A243 can be processed in industry standard block molds. If recycled material is added, care has to be taken that the density of the recycled material equals the pre-expansion density as closely as possible to prevent segregation during production. Normally, vacuum is used in the block mold with high densities, while the vacuum sometimes has to be reduced with low densities.
Safety & Health
- Safety Instructions
Flammable pentane-air mixtures may be generated during storage and processing of sunpor® A243. For this reason, adequate ventilation must be ensured (LEL pentane 1.3 % by volume). The blowing agent pentane escapes relatively slowly from EPS foam blocks. Thus, when cutting recently molded blocks, the formation of a flammable pentane-air mixture has to be anticipated. In addition, all conceivable sources of ignition must be kept away, and the build-up of electric charges has to be prevented.
Packaging & Availability
- Packaging
sunpor® A243 is shipped in octabins (height max. 192 cm) on wooden pallets (114 x 114 cm) containing 1,150 kg net of material.
- Shipping
UN-Number 2211 Designation Polymeric beads, expandable
Class 9 Packing Group III ADR
Storage & Handling
- Storage
The octabins are not weather- or water-proof and must therefore not be exposed to outdoor conditions. It is not recommended to stack octabins more than one layer high. In case of double-stacking octabins under controlled conditions, the recommendations laid out in the document "Instructions for stacking sunpor octabins“ must be followed.
In order to obtain the desired properties of sunpor®A243, the raw material should be stored below 20 °C and be processed within one month.