Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Agrochemical Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Biodegradability
The products are expected to be inherently biodegradable.
Applications & Uses
- Markets
- Applications
- Applications
TOXIMUL TANS series are low to no solvent anionic surfactant replacements. The products provide excellent emulsification when used alone or in combination with other nonionic surfactants.
Properties
- Formulation Type
- Physical Form
- Appearance
- Amber liquid
- Soluble in
- Water, Methanol, Xylene
- Insoluble in
- Kerosene
- Typical Properties
Value Units Test Method / Conditions Actives Content 100 % - Density (at 25°C) 1.06 g/ml - Flash Point min. 94 °C PMCC Flash Point Tester HLB 12 - - Moisture Content 0.3 % - pH (5% in 1:1 IPA/H₂O) 6 - - Pour Point -11 °C - Regulated Volatile Organic Chemicals 0 % U.S. EPA Viscosity (at 25°C) 2760 cPs -
Regulatory & Compliance
- Chemical Inventories
- Clearances
- All components of TOXIMUL TANS series are listed in the following countries: United States (TSCA), Canada (DSL), New Zealand (NZIoC 6187-42-7), and China (IECSC 61791-12-6).
- The TOXIMUL TANS series are approved for use as inert ingredients under U.S. EPA 40 CFR 180.920. The TOXIMUL TANS surfactants are regulated under TSCA Section 5(a) – “Significant New Use Rules” and Section 12(b) – “Export Notification”.
Safety & Health
- Health Effects
The products are expected to be slightly toxic orally (LD₅₀ >500 <2000 mg/kg) and may cause severe skin and eye irritation.
Packaging & Availability
Storage & Handling
- Storage & Handling
- Normal safety precautions (i.e. gloves and safety goggles) should be employed when handling TOXIMUL TANS surfactants. Contact with the eyes and prolonged contact with the skin should be avoided. Wash thoroughly after handling materials.
- Bulk Storage Information: Stainless steel and glass fiber-reinforced polyester tanks are recommended. Many oven-cured phenolic and epoxy/phenolic linings may also be used. Elevated storage temperature may be desirable to maintain ease of pumping. Temperatures up to 120°F (49°C) can be maintained for long periods of time without degradation of the products.
- TOXIMUL TANS products which have been stored in drums at temperatures below 25°F (-4°C) may thicken or solidify. They may be fluidized by warming with a drum heater or in a steam room. Drums should be vented prior to heating to avoid excessive pressure build up. Product temperatures over 120°F (49°C) are not recommended.
- Workplace Exposure
Occupational exposure can occur primarily through skin contact or via inhalation of vapors and mists. Engineering controls, personal protective equipment, and other workplace practices should be used to control these exposures.