Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Name
- Cleaning Ingredients Functions
- CAS No.
- 67784-80-9
- EC No.
- 267-055-2
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- HII Features
- Functional Properties
- Contains no petroleum ingredients
- Superior lubricating agent
- Replacement for many solvents such as naphtha and mineral spirits.
- Biodegradability
Product is biodegradable.
- Product Advantages
- Good solvency – Kauri-butanol value: 38.
- Not classified as a hazardous air pollutant (HAP)
- Does not contain ozone depleting compounds (ODC)
- Contains no petroleum-derived ingredients
- Low toxicity, mild to the eyes and skin
- Biodegradable
Applications & Uses
- Markets
- Applications
- Home Care Applications
- I&I Cleaning Applications
- Applications
- Extender or co-solvent
- Metal cleaning (parts, tanks, etc.)
- Heavy duty degreasers
- Precision cleaners
- De-duster
- Form release
- Adhesive removal
- Ink removal/paint removal/paint stripper
- Moisture barrier
- Lacquer thinner
- Hood/grill cleaners
- Waterless hand cleaners
- Asphalt release
Properties
- Physical Form
- Appearance
- Clear liquid (at 25°C)
- Insoluble in
- Water
- Soluble in
- Kerosene, Methanol, Xylene
- Typical Properties
Value Units Test Method / Conditions Boiling Point 352 °C - Cloud Point 1.1 °C - Viscosity (at 25°C) 7 cPs - Color 320 - Apha Scale Color max. 4 - Gardener Scale Density (at 25°C) 0.88 g/ml - Kauri-Butanol Value 38 - - Freeze Point -5.7 °C - Melting Point 0.1 °C - Pour Point -1.6 °C - Flash Point min. 94 °C PMCC Flash Point Tester Refractive Index (at 20 °C) 1.457 - - Surface Tension 31.5 dynes/cm - Vapor Pressure (at 20°C) 3.12 mm Hg - Evaporation Rate (Butyl Acetate = 1) 0.32 - - Volatile Organic Compound 0.5 % CARB Method 310 Volatile Organic Compound 5 % U.S. EPA Method 24
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Clearances
All components of STEPOSOL SB-W are listed in the following countries; the registration number for the active ingredient is included in parentheses: United States (TSCA 67784-80-9), Europe (EINECS No. 267- 055-2), Canada (DSL 67784-80-9), Korea (ECL Serial No. KE-31749), China (IECSC 67784-80-9) and Australia (AICS 67784-80-9).
Safety & Health
- Toxicity
STEPOSOL SB-W is practically nontoxic (LD₅₀>5 g/kg). Undiluted product is mildly irritating to skin and eyes.
Packaging & Availability
Storage & Handling
- Storage & Handling
- Normal safety precautions (i.e. gloves and safety goggles) should be employed when handling STEPOSOL SB-W. Contact with eyes and prolonged contact with skin should be avoided. Wash thoroughly after handling materials. Product temperatures over 130°F (54°C) are not recommended. Being derived from soybean oil, STEPOSOL SB-W contains polyunsaturated fatty acid methyl ester that can spontaneously combust. Oily rags, presenting a large surface area for air contact, should be washed out or stored where there can be no fire hazard.
- Recommended Drum Storage: Drums should be stored sealed at temperatures of 50-110°F (10-43°C).
- Bulk Storage Information: STEPOSOL SB-W can be stored in vessels of carbon steel, but 316 or 304 stainless steel is preferred. Tanks should be closed with venting through a gooseneck vent. STEPOSOL SB-W should be stored between 50-110°F (10-43°C). External steam panel coils can be used if heating is required. Pumps, pipes, and transfer lines can be carbon steel, but 316 or 304 stainless is preferred. Rubber hoses are not recommended for extended use as STEPOSOL SB-W may degrade rubber.