Knowde Enhanced TDS
Identification & Functionality
- Chemical Name
- CAS No.
- 67762-38-3
- EC No.
- 267-015-4
- Technologies
Features & Benefits
- Labeling Claims
- Biodegradability
This product is biodegradable.
- Product Features
- Naturally derived from canola/rapessed oil.
- Ideal for applications where a lower pour point is desired.
- Naturally derived triglyceride
- Ideal for low concentration formulations
- Mild irritation and virtually colorless
Applications & Uses
- Markets
- Applications
- Home Care Applications
- I&I Cleaning Applications
- Applications
STEPOSOL ROE-W is a naturally-derived, biodegradable solvent that can be used in a variety of household, industrial & institutional applications. STEPOSOL ROE-W can be used as an industrial solvent or co-solvent, crop oil or carrier oil in agricultural applications. It can be used a replacement or co-solvent for a variety of common industrial solvents. STEPOSOL ROE-W can be used in applications where a lower cloud point is desired.
Properties
- Formulation Type
- Physical Form
- Appearance
- Clear liquid (at 25°C)
- Insoluble in
- Water
- Soluble in
- Kerosene, Methanol, Xylene
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Acid Value | max. 1 | - | - |
| Viscosity (at 25°C) | 10 | cPs | - |
| Boiling Point | 330 | °C | - |
| Density (at 25°C) | 0.88 | g/ml | - |
| Cloud Point | -2.3 | °C | - |
| Actives Content | max. 99 | % | - |
| Color | 239 | - | Apha Scale |
| Color | max. 5 | - | Gardener Scale |
| Flash Point | min. 94 | °C | PMCC Flash Point Tester |
| Iodine Value | 113 | - | - |
| Kauri-Butanol Value | 55 | - | - |
| Melting Point | -10.9 | °C | - |
| Freeze Point | -24.5 | °C | - |
| Pour Point | -13.8 | °C | - |
| Saponification Value | 190 | mg KOH/gm | - |
| Refractive Index (at 20 °C) | 1.456 | - | - |
| Surface Tension | 31.4 | dynes/cm | - |
| Volatile Organic Compound | 0.6 | % | CARB Method 310 |
| Volatile Organic Compound | 0.8 | % | CARB, Attachment B |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Clearances
- STEPOSOL ROE-W is approved for use under EPA 40 CFR 180.910, pre- and post-harvest applications.
- All components of STEPOSOL ROE-W are listed in the following countries: United States (TSCA 67762-38-3), Europe (EINECS 267- 015-4), Canada (DSL 67762-38-3), Korea (ECL Serial No. KE-14358), China (IECSC 67762-38-3), Japan (ENCS Number 7-670), Philippines (PICCS 67762-38-3), and Australia (AICS 67762-38- 3).
- Per the California Air Resources Board’s (CARB) Consumer Product Rule, OTC Model Rule and Federal VOC Standards, STEPOSOL ROE-W is exempt from VOC limit requirements because it is a LVP-VOC (low vapor pressure VOC). All regulations define an LVP-VOC as a compound or mixture which meets one of the following criteria:
- The compound has a vapor pressure of less than 0.1 mm Hg at 20°C.
- The compound has more than 12 carbon atoms, or a mixture compromised solely of compounds with more than 12 carbon atoms, and the vapor pressure is unknown or
- The compound has a boiling point greater than 216°C.
Safety & Health
- Toxicity
STEPOSOL ROE-W has a low toxicity (oral LD50 >5000 mg/kg) and is not a skin and eye irritant.
Packaging & Availability
- Packaging Type
Storage & Handling
- Storage & Handling
Normal safety precautions (i.e. gloves and safety goggles) should be employed when handling STEPOSOL ROE-W. Contact with eyes and prolonged contact with skin should be avoided. Wash thoroughly after handling materials. Product temperatures over 130°F (54°C) are not recommended. Being derived from canola oil, STEPOSOL ROE-W contains polyunsaturated fatty acid methyl esters that can spontaneously combust. Oily rags, presenting a large surface area for air contact, should be washed out or stored where there can be no fire hazard.
Recommended Drum Storage
STEPOSOL ROE-W should be stored in sealed containers at a temperature of 50-110°F. Storage under nitrogen will prevent degradation of the product over time.
Recommended Bulk Storage
STEPOSOL ROE-W can be stored in vessels of carbon steel; however 316 or 304 stainless steel is preferred. Tanks should be closed with venting through a gooseneck vent. STEPOSOL ROE-W should be stored between 50-110°F. External steam panel coils can be used if heating is required. Rubber hoses are not recommended for extended use. Storage under nitrogen will prevent degradation of the product over time.