company tower banner
Stepan Company Company Logo

STEPOSOL® CA-207

STEPOSOL® CA-207 is an anionic surfactant providing maximum foaming power in hard and soft water, brine solutions, and in the presence of oil. Steposol ca-207 is a unique surfactant developed to provide maximum foaming power in soft and hard water, fresh water, and saturated brine solutions. Steposol ca-207 also foams in the presence of oils or high concentrations of polyvalent cations, such as calcium and magnesium. The bubble structure tends to be denser and of higher viscosity than that produced by other foaming surfactants. A low cloud point makes it a logical choice for cold climates.

Brand: STEPOSOL (20 products)

Chemical Name: Poly(oxy-1,2-ethanediyl), α-sulfo-ω-hydroxy-, C6-10-alkyl ethers, ammonium salts

Functions: Surfactant, Surfactant (Anionic)

Certifications & Compliance: Kosher

Technical Data SheetSafety Data Sheet

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Features & Benefits

HII Features
Biodegradability

Product is biodegradable.

Applications & Uses

Markets
Applications
Home Care Applications
I&I Cleaning Applications
Applications

STEPOSOL CA-207 is a unique surfactant developed to provide maximum foaming power in soft and hard water, fresh water and saturated brine solutions. STEPOSOL CA-207 also foams in the presence of oils or high concentrations of polyvalent cations, such as calcium and magnesium. The bubble structure tends to be denser and of higher viscosity than that produced by other foaming surfactants. A low cloud point makes it a logical choice for cold climates.

Properties

Physical Form
Appearance
Clear liquid (at 25°C)
Typical Properties
ValueUnitsTest Method / Conditions
Actives Content (MW 368)60%-
Cloud Point-21°C-
Colormax. 4-Gardener Scale
Critical Micelle Concentration (CMC)3.1g/l-
Density (at 25°C)1.04g/ml-
Flash Point35°CSETA Flash Point Tester
Freeze Point-24°C-
pH (in 10% aqueous)7.2--
Pour Point-22°C-
Regulated Volatile Organic Chemicals (Isopropanol)15%U.S. EPA
Viscosity (at 25°C)264cPs-
Viscosity (at 60 °C)10cPs-

Regulatory & Compliance

Certifications & Compliance
Chemical Inventories
Clearances
  • All components of STEPOSOL CA-207 are included in the following countries; the registration numbers for the active ingredients are included in parentheses: United States (TSCA),Canada (DSL), Australia (AICS), Philippines (PICCS), Japan (ENCS), New Zealand (NZIoC) and China (EICSC)
  • It is the responsibility of the formulator to review the chemical control regulations for each country where the end product is intended to be sold or used.

Safety & Health

Toxicity

Alcohol ethoxy sulfates are slightly to practically non-toxic orally (LD₅₀ >5g/kg) and cause moderate eye irritation and mild to moderate skin irritation.

Packaging & Availability

Packaging Type
Standard Packaging

STEPOSOL CA-207 is available in bulk and in 55 gallon drums (net weight 450 lb/204 kg).

Storage & Handling

Storage & Handling
  • It is recommended that STEPOSOL CA-207 be stored in sealed containers kept in a well ventilated, cool, dry area away from sparks, fire, and open flame. Avoid overheating or freezing. Equipment should be grounded when transferring or using material. Avoid contact with the eyes and prolonged contact with the skin. Wash thoroughly after handling the material.
  • Bulk storage information: Tanks made of 316 stainless steel or fiberglass with an Atlac 382 corrosion liner, atmospheric storage with a flame arrestor, and fittings electrically grounded are recommended. Centrifugal pumps and piping should be 316 stainless steel. Recommended storage for bulk tanks is 80-90 °F (26-32 °C).