Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Name
- Product Type
- Cleaning Ingredients Functions
- Technologies
- Product Families
- Chemical Structure
- Surfactant Type
Cationic.
Features & Benefits
- HII Features
- Biodegradability
STEPANQUAT products are biodegradable.
Applications & Uses
- Markets
- Applications
- Home Care Applications
- I&I Cleaning Applications
- Applications
STEPANQUAT 888 may provide cationic surfactant, dispersant or emulsifier properties in formulation. STEPANQUAT 888 may be considered for use in:
- Emulsion breakers (to de-stabilize emulsions stabilized by anionics)
- Used to make hydrophobized clays, and may hydrophobize other surfaces with negative charges (e.g. sand)
- Specialty emulsifiers
- Solids wetter and wax dispersants
Properties
- Physical Form
- Appearance
- Clear liquid
- Typical Properties
Value Units Test Method / Conditions Color max. 250 - Apha Scale Density 0.91 g/ml - pH (in 10% aqueous) 8.6 - - Flash Point 38.8 °C - Free Amine and Amine Hydrochloride max. 2.1 % - Viscosity (at 25°C) 360 cPs - Pour Point -12 °C - Regulated Volatile Organic Chemicals (Ethanol) 10 % U.S. EPA
Regulatory & Compliance
- Chemical Inventories
- Clearances
All components of STEPANQUAT 888 quaternaries are on the following country inventories; CASRNs 68424-85-1, 32426-11-2, 5538-94-3, 7173-51-5; United States (TSCA), Europe (EINECS 270-325-2; 251-035-5, 226-901-0, 230-525-2), Japan (ENCS 3-2694, 2-184, 2-184, 2-184), Canada (DSL), Australia (AICS), Philippines (PICCS), China (IECSC), New Zealand (NZIoC) and Korea (ECL KE-29999, KE-26732, KE-11982, KE-10281). It is the responsibility of the end user to review the chemical control regulations for each country.
Safety & Health
- Health Effects
STEPANQUAT 888 is moderately toxic orally (LD₅₀ is between 50-500 mg/Kg) and cause severe skin and eye irritation.
Packaging & Availability
- Packaging Type
- Standard Packaging
STEPANQUAT 888 is available in 275 gallon totes and in bulk quantities. It is also available in 55 gallon drums.
Storage & Handling
- Storage & Handling
Handle liquid STEPANQUAT products with care; use away from sparks and open flame. Use in well ventilated area.Avoid contact with eyes, nose and skin contact. Gloves, protective clothing, safety goggles and face shield should be worn when handling STEPANQUAT products. Wash thoroughly after handling products. It is recommended that STEPANQUAT products be stored in sealed containers and kept in a cool, dry place. If material is frozen, it should be heated gently and stirred to ensure it is homogeneous before use.
Bulk Storage Information
STEPANQUAT quaternaries can be stored in vessels of 316 stainless steel or fiberglass with a corrosion liner. Contact between quaternaries and anionic materials must be avoided. At use dilution, STEPANQUAT quaternaries are non-corrosive to most plastics, natural rubber, stainless steel, monel metal, iron, brass, aluminum, lead and tin; however, STEPANQUAT quaternaries as supplied, may be corrosive to the materials listed above. Liquid STEPANQUAT products should be stored between 29 – 49 °C (85 – 120 °F). An internal hairpin coil of 316 stainless steel with low pressure steam (under 50 psig) should be used if heating is required. Mild agitation is recommended while storing to maintain homogeneity. Pumps, pipes and transfer lines should be 316 stainless steel. Rubber hoses with Teflon cross-linked polyethylene with 316 stainless steel fittings are recommended for loading and unloading.
- Workplace Exposure
Occupational exposure can occur primarily through skin contact or via inhalation of vapors and mists. Engineering controls, personal protective equipment, and other workplace practices should be used to control these exposures.