Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Chemical Name
- Fluids & Lubricants Functions
- CAS No.
- 1300-72-7
- EC No.
- 215-090-9
- Technologies
- Product Families
Features & Benefits
- Fluids & Lubricants Features
- Biodegradability
Product is readily biodegradable.
- Product Benefits
- Couples formulation components
- Imparts corrosion inhibition
- Assists in the emulsification of components in soluble oil formulations
Functional Characteristics.
- Emulsification.
- Corrosion Inhibition.
- Coupling Agent.
Applications & Uses
- Markets
- Applications
- Fluids & Lubricants Type
- Fluids & Lubricants End Use
- Applications
STEPAN MWA-110 is a sulfonate that is used in metalworking applications. STEPAN MWA-110 is used in the emulsification of components in metalworking formulations. It can act as a coupling agent for several components in soluble oils, semi-synthetic and synthetic fluids.
Properties
- Physical Form
- Appearance
- Clear liquid (at 25°C)
- Typical Properties
Value Units Test Method / Conditions Actives Content 41 % - Cloud Point -5 °C - Color max. 50 - Klett Colorimeter Crystallization Point 16 °C - Density 1.164 g/ml - Flash Point min. 94 °C PMCC Flash Point Tester Freeze Point -7 °C - pH 8.5 - - Pour Point -9 °C - Regulated Volatile Organic Chemicals 0 % U.S. EPA Solids Content 42 wt% - Viscosity (at 0°C) 21 cPs - Viscosity (at 25°C) 7 cPs - Viscosity (at 60 °C) 2 cPs -
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Clearances
- The international inventories (country clearances) of STEPAN MWA-110 can be found in Section 15 of the Safety Data Sheet (SDS).
- STEPAN MWA-110 is available in Kosher grade.
Safety & Health
- Health Effects
STEPAN MWA-110 is practically non-toxic orally (LD₅₀ > 7000 mg/kg). The product is slightly irritating to skin and moderately irritating to the eye when tested at > 90% active. See the SDS for further information.
Packaging & Availability
- Packaging Type
- Standard Packaging
STEPAN® MWA-110 is available in drums
Storage & Handling
- Workplace Exposure
Occupational exposure can occur primarily through skin contact or via inhalation of vapors and mists. Engineering controls, personal protective equipment, and other workplace practices should be used to control these exposures. See the SDS for further information.
- Storage & Handling
- Normal safety precautions (e.g. gloves and safety goggles) should be employed when handling STEPAN MWA-110. Contact with eyes, nose or prolonged contact with skin should be avoided. Wash thoroughly after handling STEPAN MWA-110. See the SDS for further information.
- Non-Bulk Storage Recommendations: It is recommended that STEPAN MWA-110 be stored in closed containers and kept in a cool, dry place. Liquipak or HDPE plastic drums are recommended for storage of STEPAN MWA-110. If the material is exposed to cooler temperatures, it can crystallize and separate. It should be heated slowly and agitated gently to insure its homogeneity before use.
- Bulk Storage Recommendations: Bulk Storage Information: STEPAN MWA-110 should be stored in 316 stainless steel or fiberglass with a corrosion liner. Mild agitation is recommended while storing to maintain homogeneity. Material should be stored between 23 – 40°C (75 – 105°F). An internal hairpin coil of 316 stainless steel with low pressure steam (under 50 psig) should be used if heating is required. Pumps, pipes and transfer lines should be 316 stainless steel.