Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Carrier
- Chemical Family
- INCI Name
- Cosmetic Ingredients Functions
- Technologies
- Product Families
- Preservative
DMDM Hydantoin
Features & Benefits
- Benefit Claims
- Biodegradability
Product is biodegradable.
Applications & Uses
- Markets
- Applications
- Application Format
- Bath & Shower Applications
- Hair Care Applications
- Personal Hygiene Applications
- Skin Care Applications
- Applications
- STEPAN-MILD BSB provides improved mildness without sacrificing performance attributes. Its low irritation properties make it useful for mild cleansing products. It can be used for children and baby products as well as for adult products where sensitive skin is involved.
- STEPAN-MILD BSB is a concentrated mild blend that can be readily formulated into baby shampoos, bubble baths and liquid hand soaps. Just add water, preservative, dye, and fragrance. See back side for an easy-to-make baby shampoo formulation.
Properties
- Physical Form
- Appearance
- Clear to cloudy liquid (at 25°C)
- Typical Properties
Value Units Test Method / Conditions Color 1.5 - Gardener Scale Density 1.056 g/ml - Solids Content 41.9 wt% - Flash Point min. 94 °C PMCC Flash Point Tester pH (10% in aqueous solution) 7.54 - - Sodium Chloride Content 2.19 % - Viscosity (at 25°C) max. 4000 cPs - Sodium Sulfate Content 0.06 % - Unsulfated Alcohol 0.96 % - Regulated Volatile Organic Chemicals 0 % U.S. EPA
Regulatory & Compliance
- Chemical Inventories
- Clearances
STEPAN-MILD BSB is approved for use in the United States in cosmetic applications only. All components of STEPAN-MILD BSB are listed in the following countries: Australia (AICS), Canada (DSL), China (IECSC), New Zealand (NZIoC), and Philippines (PICCS).
Safety & Health
- Health Effects
Clinical studies have shown STEPAN-MILD BSB to be comparable to “no tears” commercial products and therefore it is judged to be safe for use near the eye areas of customers.
Packaging & Availability
Storage & Handling
- Storage & Handling
- STEPAN-MILD BSB is a concentrated surface active agent. Normal safety precautions (i.e. the use of gloves and eye goggles) should be employed when using this product. Prolonged contact with the eyes and prolonged contact with the skin should be avoided. Wash thoroughly after handling material.
- It is recommended that STEPAN-MILD BSB be stored in sealed containers and kept at temperatures above 45°F (7°C), but not above 110°F (43.3°C). Avoid overheating or freezing. If material is frozen, mild heat and agitation are recommended to ensure the material is homogeneous before use.
- Workplace Exposure
Occupational exposure can occur primarily through skin contact or via inhalation of vapors and mists. Engineering controls, personal protective equipment, and other workplace practices should be used to control these exposures.