Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Carrier
- Chemical Family
- Chemical Name
- Industrial Additives Functions
- CAS No.
- 67762-19-0
- EC No.
- 500-172-1
- Technologies
- Product Families
- Chemical Formula
(CH3)(CH2)11O(CH2CH2O)nSO3NH4
n=3
Features & Benefits
- Biodegradability
Product is biodegradable.
Applications & Uses
- Markets
- Applications
- Applicable Processes
- Applications
POLYSTEP B-11 is used in latex manufacture; it aids in the control of latex particle size. It is useful in most polymer systems, especially with vinyl chloride and styrene-butadiene emulsions.
Properties
- Physical Form
- Appearance
- Clear liquid
- Typical Properties
Value Units Test Method / Conditions pH (in 10% aqueous solution) 7.3 - - Actives Content (EW 436) 59 % - Pour Point 4 °C - Freeze Point 1 °C - Cloud Point 6 °C - Color (5% active) 35 % Klett Colorimeter Viscosity (at 25°C) 66 cPs - Viscosity (at 60°C) 19 cPs - Flash Point 28 °C - Density 1.01 g/ml - Critical Micelle Concentration (CMC) 84 mg/L - Surface Tension (at CMC) 31 dynes/cm - Regulated Volatile Organic Chemicals (Ethanol) 14 % U.S. EPA
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Clearances
- United States (TSCA 67762-19-0), Australia (AICS 67762-19-0), Canada (DSL 67762-19-0), China (IECSC 67762-19-0), Europe (Polymer Exempt), Japan (ENCS 7-155 and 1-391), Korea (ECL Serial No. KE-32434), New Zealand (NZIoC 67762-19-0), and Philippines (PICCS 67762-19-0). It is the responsibility of the end user to review the chemical control regulations for each country.
- POLYSTEP B-11 is available in Kosher grade.
Safety & Health
- Health Effects
POLYSTEP B-11 is practically non-toxic orally (LD50 >5g/kg) at the 7.5% solution level and it causes moderate skin and eye irritation.
Packaging & Availability
Storage & Handling
- Storage & Handling
Handle POLYSTEP B-11 with care; keep away from sparks and open flame. Use in wellcventilated area. Contact with eyes or nose, or prolonged contact with the skin should be avoided. Use gloves and safety goggles when handling POLYSTEP B-11. It is recommended that POLYSTEP B-11 be stored in polyethylene drums and kept in a dry place between 80 and 90°F. If material is frozen it should be heated gently and stirred to ensure that it is homogeneous before use.
Bulk Storage Information
POLYSTEP B-11 should be stored in container made of 316 stainless steel or fiberglass with a corrosion resistant liner. Atmospheric storage with flame arrestor is recommended. All fittings should be electrically grounded. Mild agitation is recommended while storing to maintain homogeneity. Material should be stored between 80 and 90°F. Use mild heat if needed avoiding the use of steam since it may impact product integrity. Recirculated warm water is recommended. Pumps, pipes and transfer lines should be 316 stainless steel.
- Workplace Exposure
Occupational exposure can occur primarily through skin contact or via inhalation of vapors and mists. Engineering controls, personal protective equipment, and other workplace practices should be used to control these exposures.