Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Chemical Name
- Industrial Additives Functions
- CAS No.
- 27177-77-1
- EC No.
- 248-296-2
- Technologies
- Product Families
- Chemical Structure
Features & Benefits
- Labeling Claims
- Industrial Additives Features
- Biodegradability
Product is readily biodegradable.
Applications & Uses
- Markets
- Applications
- Applicable Processes
- Applications
POLYSTEP A-15/30-K is used in the manufacture of latex. It is especially useful with vinyl chloride, vinylidene chloride and styrene-butadiene. POLYSTEP A-15/30-K has excellent thermal and hydrolytic stability.
Properties
- Physical Form
- Appearance
- Hazy slurry
- Typical Properties
Value Units Test Method / Conditions pH (in 10% aqueous solution) 8 - - Actives Content (EW 356) 27.5 % - Color (5% active) max. 150 % Klett Colorimeter Viscosity (at 25°C) 1000 cPs - Viscosity (at 60°C) 100 cPs - Pour Point -5 °C - Freeze Point -4 °C - Flash Point min. 94 °C - Density (at 100 °F) 1.03 g/ml - Critical Micelle Concentration (CMC) 854 mg/L - Regulated Volatile Organic Chemicals (Ethanol) 0 % U.S. EPA Surface Tension (at CMC) 33 dynes/cm -
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Clearances
- All components of POLYSTEP A-15/30-K are listed in the following countries; the registration numbers for the active ingredients are included in parentheses: United States (TSCA 7177-77-1), Europe (EINECS 248-296-2), Japan (ENCS 3-1884), Canada (DSL 27177-77-1), Australia (AICS 27177-77-1), Korea (ECL Serial No. KE29107), Philippines (PICCS 27177-77-1), and China (IECSC 27177-77-1).
- POLYSTEP A-15/30-K is available as Kosher Certified.
Safety & Health
- Health Effects
POLYSTEP A-15/30-K is slightly toxic orally (LD50 >1000 mg/kg) and is irritating to skin and eyes.
Packaging & Availability
Storage & Handling
- Storage & Handling
Normal safety precautions (i.e. gloves and safety goggles) should be employed when handling POLYSTEP A-15/30-K. Contact with the eyes or nose, or prolonged skin contact should be avoided. It is recommended that POLYSTEP A-15/30-K be stored in sealed containers and kept in a cool, dry place. If material freezes it should be heated gently and stirred to ensure that it is homogeneous before use.
Bulk Storage Information
POLYSTEP A-15/30-K should be stored in containers made of 316 stainless steel or fiberglass that are equipped with a corrosion resistant liner. Mild agitation is recommended during extended storing to maintain homogeneity. Material should be stored between 29-41 °C (85-105 °F). Use mild heat if needed avoiding the use of steam since it may impact product integrity. Recirculated warm water is recommended. Pumps, pipes, and transfer lines should be 316 stainless steel.
- Workplace Exposure
Occupational exposure can occur primarily through skin contact or via inhalation of vapors and mists. Engineering controls, personal protective equipment, and other workplace practices should be used to control these exposures.