Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Name
- INCI Name
- Cleaning Ingredients Functions
- Cosmetic Ingredients Functions
- CAS No.
- 137-16-6
- EC No.
- 205-281-5
- Technologies
- Product Families
- Preservative
- Phenoxyethanol, Sodium Benzoate
Features & Benefits
- Benefit Claims
- Labeling Claims
- HII Features
- Functional Properties
- Mild
- Foam Booster/Stabilizer
- Sulfate-Free
- Wetting Agent
- Good Detergency
- Corrosion Inhibitor
- Increases solubility of other surfactants
- Compatible with anionics, nonionics, and cationic surfactants
- Stable in neutral to moderately acidic formulations
- High Salt Tolerance
- Emollient
- Conditioner
- Good Rinsibility
- Low Cloud Point
- Rapid Biodegradability
- Biodegradability
MAPROSYL 30-MP is readily biodegradable.
Applications & Uses
- Markets
- Applications
- Application Format
- Bath & Shower Applications
- Hair Care Applications
- Home Care Applications
- I&I Cleaning Applications
- Personal Hygiene Applications
- Skin Care Applications
- End Product Uses
- Shampoos
- Manicuring Products
- Bubble Baths
- Aerosols (shaving creams, shampoos, etc.)
- Alkaline Cleaners
- Automatic Dishwasher Rinse-Aids
- Liquid Dishwashing Detergents
- Rug & Upholstery Shampoos
- Aerosols (window, upholstery cleaners, etc.)
- Emulsion Polymerization
Properties
- Physical Form
- Appearance
- Clear, colorless to pale yellow liquid (at 25°C)
- Typical Properties
Value Units Test Method / Conditions Actives Content (MW 293) 30 % - Boiling Point min. 100 °C - Cloud Point -2 °C - Color max. 250 - Apha Scale Density (at 25°C) 1.03 g/ml - Flash Point min. 94 °C PMCC Flash Point Tester Freeze Point -2 °C - HLB 29.8 - - pH (in 5% aqueous) 6 - - Regulated Volatile Organic Chemicals 0 % U.S. EPA Viscosity (at 20°C) 29 cPs - Viscosity (at 60 °C) 15 cPs -
Regulatory & Compliance
- Chemical Inventories
- Clearances
The international inventories (country clearances) of MAPROSYL 30-MP can be found in Section 15 of the Safety Data Sheet (SDS). It is the responsibility of the formulator to review the chemical control regulations for each country where the end-product is intended to be sold or used.
Safety & Health
- Health Effects
MAPROSYL 30- MP is practically nontoxic orally (LD₅₀ > 5000 mg/kg) in rats. The product is severely irritating to eyes and causes mild to moderate skin irritation at 30% active. See SDS for further information.
Packaging & Availability
- Packaging Type
- Standard Packaging
MAPROSYL 30- MP is available in drum quantities.
Storage & Handling
- Storage & Handling
- Normal safety precautions (e.g., gloves and safety goggles) should be employed when handling MAPROSYL 30-MP. Contact with eyes, nose or prolonged contact with skin should be avoided. Wash thoroughly after handling MAPROSYL 30-MP. See SDS for more information.
- It is recommended that MAPROSYL 30-MP be stored in sealed containers and kept at temperatures between 50°F (10°C) and 120°F (49°C). Avoid overheating or freezing. If material is frozen, mild heat and agitation are recommended to ensure the material is homogeneous before use.
- Workplace Exposure
Occupational exposure can occur primarily through skin contact or via inhalation of vapors and mists. Engineering controls, personal protective equipment, and other workplace safety practices should be used to control these exposures. See SDS for more information.