Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Name
- Cleaning Ingredients Functions
- Technologies
- Product Families
- Surfactant Type
Nonionic.
Features & Benefits
- HII Features
- Biodegradability
Publically available data shows this type of chemistry to be inherently biodegradable.
- Product Benefits
- Couples formulation components
- Imparts corrosion inhibition
- Assists in the emulsification of components in soluble oil formulations
Functional Characteristics.
- Emulsification.
- Corrosion Inhibition.
- Coupling Agent
- Product Benefits
- Preservative Free
Applications & Uses
- Markets
- Applications
- Home Care Applications
- I&I Cleaning Applications
- Applications
MAKON NF-180 is a nonionic surfactant designed for low-foaming and defoaming applications. Its primary use is for rinse aids and ware-wash formulations, but it can also be used functionally as a dispersant and wetting agent. It is soluble in ethanol, isopropanol, methanol, toluene, xylene, and perchloroethylene solvents.
Properties
- Physical Form
- Appearance
- Clear liquid
- Soluble in
- Ethanol, Isopropanol, Toluene, Methanol, Xylene, Perchloroethylene solvents
- Typical Properties
Value Units Test Method / Conditions pH (in 1% Aqueous) 5 - 7 - - Actives Content 100 % - Water Content max. 0.5 % CLI-WATER Color max. 60 - Apha Scale Regulated Volatile Organic Chemicals (Ethanol) 0 % U.S. EPA Hydroxyl Value 37 mg KOH/g - Cloud Point (in 1% Aqueous) 18.5 °C - Cloud Point (5g in 25 g Butyl Carbitol 25%) 34.6 °C - Pour Point -7.1 °C - Flash Point min. 94 °C - Viscosity (at 25°C (77 °F) / 38°C (100 °F)) 263 / 14 cPs - Density (at 25°C, 77°F) 1.02 g/ml - Density (at 38°C) 1.01 g/ml - Surface Tension (in 0.1% Aqueous) 32.6 dynes/cm - Interfacial Tension with Light Mineral Oil (in 0.1% Aqueous) 3.4 dynes/cm - Draves Wetting (in 0.1% Aqueous, at 25°C, 77 °F) 9.6 sec - Foam Height (0.1% Aqueous, Initial / 5 min, mm, at 25 °C, 77 °F) 31 / 0 mm - Foam Height (0.1% Aqueous, Initial / 5 min, mm, at 25 °C, 77 °F) 0 / 0 mm - Foam Height (0.1% Aqueous, Initial / 5 min, mm, at 50 °C, 122 °F) 0 / 0 mm - Solubility in Water (at 25 °C, 77 °F) min. 11 wt% -
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Clearances
The international inventories country clearances of MAKON NF-180, can be found in Section 15 of the SDS. It is the responsibility of the formulator to review the chemical control regulations for each country where the end product is intended to be sold or used.
Packaging & Availability
- Packaging Type
- Standard Packaging
MAKON NF-180 is available in drums, totes, and bulk quantities.
Storage & Handling
- Storage & Handling
Normal safety precautions (e.g., gloves and safety goggles) should be employed when handling MAKON NF180. Contact with eyes, nose, or skin should be avoided. Wash thoroughly after handling MAKON NF-180. Product temperatures over 122°F (50°C) are not recommended.
Non-Bulk Storage Recommendations
MAKON NF-180 should be stored in closed containers and kept in a cool, dry place away from incompatible materials (see Section 10 of the SDS). If material is frozen, it may be fluidized by warming with a drum heater or in a steam room. Drums should be vented prior to heating to avoid excessive pressure build up.
Bulk Storage Recommendations
MAKON NF-180 should be stored in vessels of 316 stainless steel, but carbon steel is also adequate with effective moisture exclusion. Elevated storage temperature may be desirable to maintain ease of pumping.