Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Name
- Agrochemical Functions
- Cleaning Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- HII Features
- Product Features & Benefits
- A unique class of disubstituted amides compared to aromatic hydrocarbons
- Biobased and biodegradable
- Low viscosity and vapor pressure
- High boiling point; heat and hydrolysis stability
- Stable through freeze/thaw cycling
- EPA 40 CFR 180.920 approved and REACH2 registered
- Recommended emulsifiers: tristyrylphenol ethoxylates series, EO/PO block copolymers or castor oil ethoxylates
Applications & Uses
- Markets
- Applications
- Applications
- HALLCOMID M-8-10 belongs to a unique class of disubstituted amides with utility in agricultural formulations. HALLCOMID M-8-10 displays a broad range of properties, including excellent solubility in organic solvents, low vapor pressure, and heat and hydrolysis stability. The product is EPA registered for use in Pesticide formulations.
- Microemulsions
- RTU
- Suspoemulsions
- Concentrated Emulsions
- Emulsifiable Concentrates
Properties
- Formulation Type
- Physical Form
- Appearance
- Clear liquid
- Soluble in
- Organic solvents
- Typical Properties
Value Units Test Method / Conditions Density (at 25 °C) 0.877 g/ml - Molecular Weight 171.28 - 199.3 g/mol - Moisture Content max. 0.3 % - Viscosity (at 25°C) 11 cPs - Acid Value 1 mg KOH/g - pH (in 1% Aqueous) 7.4 - - Flash Point 118 °C - Pour Point -20 °C - Boiling Point 260 °C - Freeze Point -34 °C - Melting Point -17 °C - Volatile organic Compound (CARB Attachment B) 20.3 % - Color max. 1 - Gardener Scale Amide C-8 plus C-10 min. 97 % - Dielectric Constant (at 25 °C) 17 - - Solubility M-8-10 in Water (at 25 °C) 0.12 - - Solubility M-8-10 in Water (at 25 °C) 22 - -
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Clearances
All components of HALLCOMID M-8-10 are listed in the following countries; the registration number for the active ingredient is included in parentheses: United States (TSCA 1118-92-9, 14433-76-2), Canada (NDSL 1118-92-9, 14433-76-2), Australia (AICS 1118-92-9, 14433-76-2), China (IECSC 1118-92-9, 14433-76-2), Japan (ENCS 2- 825), Europe (EINECS 214-272-5, 238-405-1). HALLCOMID M-8-10 is approved for use as an agricultural inert under U.S. EPA 40 CFR 180.920, pre-harvest applications. It is the responsibility of the formulator to review the chemical control regulations for each country where the end product is intended to be sold or used.
Safety & Health
- Toxicity
HALLCOMID M-8-10 was found to be slightly toxic orally (LD50=1,750 mg/kg). Undiluted product may cause severe eye and skin irritation.
- Chemical Structure
R= C7H15 or C9H19
- DOT Classification
- Non-Regulated
Packaging & Availability
- Packaging Type
- Standard Packaging
Available in drums (390 lb, 177 kg) or bulk.
Storage & Handling
- Storage & Handling
Normal safety precautions (i.e., gloves and safety goggles) should be employed when handling HALLCOMID M-8-10. Contact with eyes and prolonged contact with skin should be avoided. Wash thoroughly after handling materials.
Bulk Storage Information
Stainless steel tanks are recommended. Temperatures up to 130°F (54 °C) can be maintained for long periods of time without degradation of the product.