Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Name
- Agrochemical Functions
- CAS No.
- 1356964-77-6
- EC No.
- 806-919-0
- Technologies
- Product Families
- Chemical Structure
Features & Benefits
- Labeling Claims
- Agrochemicals Features
- Product Features & Benefits
- Biobased and biodegradable
- Better skin and eye irritation profiles compared to aromatic hydrocarbons based on FIFRA and GHS classification.
- Unique, unsaturated, disubstituted amide, manufactured using metathesis technology
- EPA 40 CFR 180.910 approved, up to 20% w/w in formulation
- Stepan’s Co-Solvent for EW Formulations
- A unique, unsaturated, disubstituted amide, manufactured using metathesis technology
- EPA 40 CFR 180.910 approved, up to 20% w/w in formulation
- Solubility in water (25°C, % wt) approximately 0.2
- Lower pour point (-24°C)
- Biodegradability
This product is readily biodegradable.
Applications & Uses
- Markets
- Applications
- Applications
- HALLCOMID 1025 is a unique, unsaturated, di-substituted amide derived from a biobased renewable feedstock, manufactured using metathesis technology. Among other properties, HALLCOMID 1025 exhibits excellent solvency, heat, and hydrolytic stability.
- Emulsifiable Concentrates
- Microemulsions
- Concentrated Emulsions
- Pesticide Solubility
Pesticide Type Solubility (wt. %)
Tebucanozole 35.7 Chlorpyrifos 76.2 Trifluralin 64.9 Propanil 59 Bifenthrin 40.8
Properties
- Formulation Type
- Physical Form
- Appearance
- Clear liquid
- Soluble in
- Kerosene, Methanol, Xylene
- Typical Properties
Value Units Test Method / Conditions Molecular Weight 197 g/mol - Amide Content min. 97 % - Moisture Content max. 0.5 % - Viscosity (at 25°C) 4 cPs - pH (in 5% in 1:1 IPA/H2O) 8 - - Density (at 25°C) 0.892 g/ml - Color max. 1 - Gardener Scale Pour Point -14 °C - Freeze Point -16 °C - Melting Point -9.5 °C - Boiling Point 297 °C - Flash Point 134 °C - Dielectric Constant (at 25 °C) 16.09 - - Volatile organic Compound (CARB Attachment B) 99.58 % - Solubility HALLCOMID 1025 in Water (at 25 °C) 0.2 wt% - Water in HALLCOMID 1025 (at 25 °C) 19 % -
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Clearances
All components of HALLCOMID 1025 are listed in the following countries; the registration number for the active ingredient is in parenthesis: United States (TSCA 1356964-77-6), and Europe. It is the responsibility of the importer and end user to comply with the chemical control regulations for each country. HALLCOMID 1025 is EPA-approved for use on growing crops and post-harvest (40 CFR 180.910) at a use rate of up to 20% in formulation.
Safety & Health
- Health Effects
HALLCOMID 1025 was found to be slightly toxic orally (LD50 = 550 mg/kg). Undiluted product may cause severe eye and skin irritation.
- DOT Classification
- Non-regulated
Packaging & Availability
- Packaging Type
- Standard Packaging
Available in drum (390 lb, 177 kg) quantities.
Storage & Handling
- Storage & Handling
Bulk Storage Information
316 and 304 stainless steel tanks are recommended. Temperatures up to 54°C (130°F) can be maintained for long periods of time without degradation of the product. Normal safety precautions (i.e., gloves and safety goggles) should be employed when handling HALLCOMID 1025. Contact with eyes and prolonged contact with skin should be avoided. Wash thoroughly after handling material. Consult the MSDS for additional information on properties and handling.