Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Physical Form
- Mechanical Properties
Value Units Test Method / Conditions Flexural Modulus 1878 MPa ISO 178 Tensile Modulus 1710 MPa ISO 527-1, -2 Tensile Stress at Yield 36 MPa ISO 527-1, -2 Tensile Strain at Yield 9 % ISO 527-1, -2 Tensile Strain at Break min. 50 % ISO 527-1, -2 Charpy Impact Notched, Type 1, Edgewise, Notch A (at 23 °C) 4.6 kJ/m² ISO 179 Charpy Impact Notched, Type 1, Edgewise, Notch A (at 0 °C) 1.9 kJ/m² ISO 179 Charpy Impact Notched, Type 1, Edgewise, Notch A (at -20 °C) 1.2 kJ/m² ISO 179 Notched Izod Impact Strength (at 23 °C) 4.4 J/m ISO 180 - Typical Properties
Value Units Test Method / Conditions Density 0.9 g/cm³ ISO1183-1 Melt Flow Rate (at 230 °C/2.16 kg.) 3.4 g/10 min ISO1133 Barrel temperature range 210 -250 °C - - Thermal Properties
Value Units Test Method / Conditions Heat Deflection Temperature-A, 1.8 MPa, unannealed 60 °C ISO 75B-1, -2 Heat Deflection Temperature -B, 0.45 MPa, unannealed 105 °C ISO 75B-1, -2 Vicat Softening Temperature, A50 159 °C ISO 306 Vicat Softening Temperature, B50 95 °C ISO 306
Regulatory & Compliance
- Certifications & Compliance
- Food Contact Regulation
This product complies with the relevant requirements of EU, China, South America & United States Food contact. Declaration of Compliance Certificate are available on our Internet site.
Storage & Handling
- Safety and Handling
The product is not classified as a hazardous material. Polypropylene resin should be stored in a manner to prevent a direct exposure to sunlight and/or heat. The storage area should also be dry and preferably do not exceed 50°C. Sipchem would not give warranty to bad storage conditions which may lead to quality deterioration such as color change, bad smell and inadequate product performance. It is advisable to process PP resin within 6 months after delivery. Conveying equipment should be designed to prevent production and accumulation of fines and dust particles that are contained in polymer resins. These particles can under certain conditions pose an explosion hazard. Conveying systems should be grounded, equipped with adequate filters and regularly inspected for leaks.