Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Unique Characteristics
- Easy to Process with 1 to 1 Mix Ratio
- Low Viscosity for Capturing Detail
- Good Durometer for Easier Demolding
Applications & Uses
- Markets
- Applications
Properties
- Physical Form
- Typical Properties
Value Units Test Method / Conditions Color (Comp A) Yellow/Clear - - Color (Comp B) Translucent Amber - - Coverage 27 cu/in/lb - De-mold Time (Reactivity) 16 – 24 hrs - Elongation 1100 % ASTM D-638 Gel Time (Reactivity) 20 min - Mix Ratio by weight (Comp A) 100 - - Mix Ratio by weight (Comp B) 100 - - Hardness 30 Shore A - Specific Gravity 1 - - Tear Resistance 98 pli ASTM D-624 Tensile Strength 402 psi ASTM D-638 Viscosity (Comp A) 2000 cps - Viscosity (Comp B) 1500 cps -
Safety & Health
- Handling and Safety
Use proper equipment—gloves, glasses and apron when using materials. Avoid direct contact with skin and eyes. If skin contact occurs, clean area with waterless hand cleaner or isopropyl alcohol. For eye contact, flush eye with water for 15 minutes and call physician. Use materials under adequate ventilation.
Packaging & Availability
- Pacakaging
- Pint Kit (2 lbs)
- Qrt Kit (4 lbs)
- Gal Kit (16 lbs)
- 5 Gal Kit (80 lbs)
Storage & Handling
- Storage/ Shelf Life
A and B components must be stored in their original, unopened containers at temperatures between 65F and 85F. Shelf life of materials when kept in unopened sealed containers, at the recommended storage conditions, is 6 months. Containers should not be opened until ready for use. Once containers are opened, material should be used in a short time period. Pre-test any aged material before using. Molds or parts should be cleaned with a soap solution and completely dried prior to storing them in a dry, cool environment. Avoid stacking or exposing them to environmental elements—UV and moisture.