Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts

POLSIL® GUM 100/60

Polsil® GUM 100/60 is general purpose heat cured elastomer widely used for molding and extrusion in various industries.

Brand: POLSIL (17 products)

Polymer Name: Silicone Elastomer

Processing Methods: Compression Molding, Extrusion

End Uses: Hoses, Shock Absorbing Pads

Features: Chemical Resistant, Durable, Flexible, Good UV Resistance, Heat Resistance, High Gas Permeability, Ozone Resistant

Technical Data Sheet

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Chemical Family
Silicones
Polymer Name
Silicone Elastomer
Technologies
Elastomers
Product Families
Elastomers — Specialty Elastomers
Silicone Elastomers

Features & Benefits

Materials Features
Chemical Resistant,
Durable,
Flexible,
Good UV Resistance,
Heat Resistance,
High Gas Permeability,
Ozone Resistant
Features and Benefits
  • High Resistance to Aging Caused by Light, Oxygen, Environment Factors
  • Resistance to Uv Radiation and Ozone
  • Resistance to Low and High Temperatures at Low Change-Abilities of Physical Characteristic
  • Chemical Resistance
  • Very Good Insulation Properties
  • Gas Permeability
  • Flexibility and Durability
  •  Physiologically Neutral

Applications & Uses

Markets
Agriculture & Feed,
Automotive & Transportation,
Building & Construction
Applications
Agriculture & Feed — Agricultural Films
Pipes & Hoses
Automotive & Transportation — Automotive
Chassis & Brake,
Powertrain & UTH
Building & Construction — Building Materials
Structural Components
Cure Method
Heat Cure
Plastics & Elastomers End Uses
Hoses,
Shock Absorbing Pads
Plastics & Elastomers Processing Methods
Compression Molding,
Extrusion
Applications

Polsil® GUM 100/60 due to excellent physical and chemical properties can be used for production of: hoses, sections and cords, suppression pads, various sorts of seals, cylinder lining, construction elements, panels and many other extrusion molded and molded articles.

Production of Masterbatches

HTV silicon rubbers are available as masterbatches or compounds ready for processing and containing such additives like peroxides, pigments etc. The names of compounds are determined on the used HTV masterbatch. Depending on added peroxide, so called vulcanization initiator – a letter D, T or M is added to the name of a rubber. The color of the compounds is determined by the RAL palette or by the common name transparent.

Properties

Physical Form
Fluid,
Liquid
Appearance
Translucent
Typical Properties
ValueUnitsTest Method / Conditions
Density 1.15 - 1.22g/cm3PN - ISO 2781:1966
Hardness55-65Shore APN – EN ISO 868
Tensile Strength min. 7.5MPa PN - ISO 37
Elongation at Breakmin. 300% PN - ISO 37
Tear Resistance min.17kN/m PN - ISO 34-1
Thermal Resistance200°C-
Volume Resistivity 1 x 10^14Ω cm PN – 88/ E-04405:1989
Surface Resistivity 1 x 10^15Ω PN – 88/ E-04405:1989
Dielectric Strength at least 12.00kV/mm PN-EN-60243-1:2002
Dielectric Loss Factor (50 Hz)less than 0.001tg ∂ PN- 86 E-04403

Packaging & Availability

Packaging Type
Boxes
Packing

Packing

Polyethylene foil and cardboard boxes.

Warranty periods 6 months from the date of manufacture

Storage & Handling

Storage

Storage

Store in the original tightly closed containers at dry conditions at temperature from 0 to 40°C.