AQUARYL PRIMO

AFNOR NF T 36-005 Family I Class 7b2

Indoors on usual building substrates such as plasterboard with cardboard skin, paint coatings, cement and hydraulic coatings, normally absorbent, bare or coated with old adherent paints in good condition.

• Conditions Application: Interior: Temperature between 8° and 35°C - Hygrometry < 70% RH. Do not apply on condensing substrates. Masonry moisture content < 5%.
• Application Material: Airless
• Sleeve: wicking polyamide continuous thread 12mm
• Brush: mixed
• Dilution: Ready to use, up to 5% water
• Equipment cleaning: With water immediately after use.

The supports must comply with the DTU concerning them and in particular with NF DTU 59.1.
Prior recognition necessary to determine the most suitable preparation for their condition and nature (cleaning, washing/rinsing, sanding, scraping, degreasing, roughening, dusting, etc.).
In general, after preparation, the supports must be healthy, cohesive, clean, dry to receive a layer of
AQUARIL PRIMO.
On interior supports such as: - Plasterboard with cardboard skin, paint coatings, cement and hydraulic coatings: preparation of the support then application of a coat of AQUARYL PRIMO. On old adhering paints: preparation of the support, in particular by degreasing with DEGRAISSANT LT 615 followed by rinsing with water, drying and roughening of glossy paints, then application of a coat of AQUARYL PRIMO. For any other substrate, consult the technical data sheets for primers with specific functions such as AQUAPRIM MICRO, AQUAPRIM ISOLANT, ADERPRIM MICRO or contact our technical departments.