Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts

AQUARYL IMPRESS+

AQUARYL IMPRESS+ is a Opacifying impression based on acrylic resin in aqueous phase. Which is good filling power, good glide, VOC< 1g/L. Indoors on usual building substrates such as plasterboard with cardboard skin, paint coatings, cement and hydraulic coatings, normally absorbent, bare or coated with old adherent paints in good condition. Interior: Temperature between 8° and 35°C - Hygrometry < 70% RH. Do not apply on condensing substrates. Masonry moisture content < 5%. The supports must comply with the DTU concerning them and in particular with NF DTU 59.1. Prior recognition necessary to determine the most suitable preparation for their condition and nature (cleaning, washing/rinsing, sanding, scraping, degreasing, roughening, dusting, etc.). In general, after preparation, the substrates must be healthy, cohesive, clean and dry to receive a coat of AQUARYL IMPRESS+.

Brand: AQUARYL (3 products)

Product Type: Top Coat, Waterborne Coating

Compatible Substrates & Surfaces: Concrete, Painted Surfaces

Application Method: Brush

Chemical Family: Acrylics & Acrylates

Safety Data Sheet

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Chemical Family
Acrylics & Acrylates
Product Type
Top Coat,
Waterborne Coating
Technologies
Ready-to-Use Products
Product Families
Ready-to-Use Products — Paints & Coatings
Top Coats
Classification

AFNOR NF T 36-005 Family I Class 7b2

Features & Benefits

Features
  • Good filling power.
  • COV <1g/L.
  • Good glide.

Applications & Uses

Markets
Building & Construction
Applications
Building & Construction — Decorative Materials & Finishes
Decorative Paints, Coatings & Stains
Application Method
Brush
Compatible Substrates & Surfaces
Concrete,
Painted Surfaces
Destination

Indoors on usual building substrates such as plasterboard with cardboard skin, paint coatings, cement and hydraulic coatings, normally absorbent, bare or coated with old adherent paints in good condition.

Application Characteristics
  • Conditions Application: Interior: Temperature between 8° and 35°C - Hygrometry < 70% RH. Do not apply on condensing substrates. Masonry moisture content < 5%.
  • Application material:   Airless, low pressure nozzle 415 at 90-110 bars or standard nozzle 517 at 180-200 bars.
  • Sleeve:  Wicking polyamide continuous thread 12mm.
  • Dilution: Ready to use, up to 5% water.
  • Equipment Cleaning: With water immediately after use.

 

Implementation

The supports must comply with the DTU concerning them and in particular with NF DTU 59.1.

Prior recognition necessary in order to determine the most suitable preparation for their condition and nature (cleaning, washing/rinsing, sanding, scraping, degreasing, roughening, dusting, etc.). In general, after preparation, the supports must be healthy, cohesive, clean, dry to receive a layer of AQUARYL IMPRESS+.
On interior substrates such as: rinsing with water, drying and roughening of the glossy paints, then application of a coat of AQUARYL IMPRESS+.
Plasterboard with cardboard skin, paint coatings, cement and hydraulic coatings: preparation of the support then On old adhering paints: preparation of the support, in particular by degreasing with DEGRAISSANT LT 615, monitoring For any other substrate, consult the technical data sheets for primers with specific functions such as AQUAPRIM MICRO
AQUAPRIM ISOLANT, ADERPRIM MICRO or contact our technical departments.

Properties

Typical Properties
ValueUnitsTest Method / Conditions
Dry Extract58.4%-
Volume54.0--
Yield8 - 10m2/L-
VOC of this productmax. 500g/L-
Density1.45--

Technical Details & Test Data

Technical Characteristics

Binders: Waterborne acrylic.

Movie Look: Matte, poached fine.

Specular Brilliants: 2 to 2.4% at 60° angle, 7 to 9% at 85° angle.

Shades: White and pastel shades, i.e. more than 45,000 shades (Series A).

 

 

 

Packaging & Availability

Packaging

Available in 3L - 6L.

Storage & Handling

Storage

Storage before opening: 12 months in the original sealed container, protected from frost and high temperatures >35°. Storage after opening: Close the container tightly after opening. The paint can be stored for 6 months away from frost and strong heat. Optimal preservation depends on the storage conditions and the quantity of paint remaining in the packaging. After this time, the product may lose quality or microbiological safety, sometimes only in texture or color.