AQUAPRIM MICRO

AFNOR NF T 36-005 Family I Class 7b2

• Insaponifiable
• Microporous
• Recoverable during the day
• High build and opacity
• Certified Excell Green Zone
• Fine grain, recoatable with stretched lacquers

Outdoors and indoors on concrete, cement plaster, wood and non-tannic derivatives, glass, porcelain stoneware, polycarbonate, aluminum, weathered galvanized steel, weathered zinc, electro galvanized, PVC*, bare or coated with old paint members in good condition. Indoors exclusively, on paint coating, plasterboard with cardboard skin and copper.

Exterior: ambient and surface temperature between 5° and 35°C - Hygrometry < 80% RH. Substrate temperature at least 3°C above dew point; avoid surfaces that are frozen, damp or too hot, do not apply in rainy, foggy weather, in strong winds or in direct sunlight. In general, moisture content of masonry < 5%. Interior: ambient and substrate temperature between 8° and 35°C - Hygrometry < 70% RH. Do not apply on condensing substrates. Exterior: the humidity of the wood before painting must not exceed 18%.

Application material: 

• Sleeve: 12mm HD microfiber or 13mm woven polyester
• Brush: 100% synthetic
• Airless: low pressure nozzle 515 at 110-130 bars or standard nozzle 517 at 210-230 bars

    
Dust free: 30min
Dry: 1 hour
Sandable: 2h
Recoatable (aqueous finish): 2h
Recoatable (solvent finish): 4 hours

AQUAPRIM MICRO diluted with 5% water. Indoors: - Copper: preparation of the support, in particular by degreasing with DAF 310 then application of a layer of AQUAPRIM MICRO. Wood with antioxidant constituents (Iroko, Padouk): preparation of the support then application of a layer of AQUAPRIM MICRO diluted with 5% water.
Plasterboard with cardboard skin, coated with paint: preparation of the support then application of a layer of AQUAPRIM MICRO Do not apply on Western Red Cedar and tannic woods (oak, chestnut). On other substrates such as tannic wood, ferrous metals, stainless steel, melamine, earthenware, consult the technical data sheets for primers such as AQUAPRIM ISOLANT, ADERPRIM MICRO or the PROTEC range or contact our technical departments. The supports must comply with the DTU concerning them and in particular with NF DTU 59.1. On metals such as: - Electrogalvanized: preparation of the support, in particular by degreasing with DAF 310 then application of a layer of AQUAPRIM MICRO. Prior recognition necessary in order to determine the most suitable preparation for their condition and nature (cleaning, washing/rinsing, sanding, scraping, degreasing, roughening, dusting, etc.). Aluminum, galvanized steel, zinc: preparation of the support, in particular by degreasing with DAF 310 then pickling with SOLUTION NT 330, followed by rinsing with water, drying then application of a coat of AQUAPRIM MICRO in white and colors pastels. In general, after preparation, the supports must be sound, cohesive, clean and dry to receive a coat of AQUAPRIM MICRO, before the application of two coats of compatible finish or the implementation of a coating or canvas of painting glass. Do not apply on ferrous metals and stainless steel. Indoors and outdoors: On concrete, cement plaster and derivative of hydraulic binder: preparation of the support, in particular dusting, degreasing, rinsing, drying, then application of a layer of AQUAPRIM MICRO diluted to 5% water. On closed supports such as: - Porcelain stoneware, glass, polycarbonate and PVC: preparation of the support, in particular by degreasing with DEGRAISSANT LT615, followed by rinsing with water, drying then application of a coat of AQUAPRIM MICRO in white and pastel colors.
On new non-tannic wood such as: - Soft woods (Framiré, Okoumé, Poplar, Pine, Pichpin): preparation of the support, in particular by eliminating resin drips, then application of a coat of AQUAPRIM MICRO diluted to 5% of 'water. Do not apply on melamine and earthenware.Hardwoods (Doussié, Niangon, Teak): preparation of the support, in particular by degreasing with DAF 310, then application of a layer of On old adhering paints: preparation of the support, in particular by degreasing with DEGRAISSANT LT615, followed by rinsing with water, drying and roughening of the glossy paints, then application of a coat of AQUAPRIM MICRO. Refer to the technical data sheets of the products mentioned.