Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Carrier
- CASE Ingredients Functions
- Industrial Additives Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
Applications & Uses
- Markets
- Applications
- Adhesive & Sealant End Applications
- Coating End Applications
- Industrial Additives End Use
- Applications
- TEXIPOL® 63-201 is supplied as an easy to use, low viscosity liquid that gives almost instantaneous thickening when mixed directly into aqueous formulations. As the polymer is already in solution it does not require any neutralization or addition of other additives to promote thickening.
- TEXIPOL® 63-201 has been used in the thickening pH of highly filled carpet backing compounds and in adhesives and coatings where stringy/long flow behavior improves the wet tack. Like other TEXIPOL® thickeners it can thicken systems as low as ~ pH 5, but is most efficient at pH>7. Typical thickener dosages are probably 0.5-2.0%, though this is system dependent and higher paste viscosities may require higher addition levels.
Properties
- Physical Form
- Appearance
- Creamy liquid
- Characteristics
Value Units Test Method / Conditions Specific Gravity (at 25°C) 1.05 - - Inverse Emulsion Viscosity (Brookfield RVT, Spindle 3, 20rpm at 25°C) 3000 mPa.s - Thickened Deionised Water min. 700 mPa.s - Polymer Charge Anionic - - - Note
*Deionised water thickened with 1% of TEXIPOL® 63-201 as supplied. Brookfield RVT, Spindle 3, 50 rpm at 25°C.
Packaging & Availability
- Packaging Type
- Packaging Information
TEXIPOL® 63-201 is available in drums and IBCs (please check with your local representative).
Storage & Handling
- Storage Conditions
TEXIPOL® 63-201 should be stored between 5 and 30°C in the original, unopened container in a dry, well ventilated place. Protect from freezing and direct sunlight.