Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts

Texipol 63-425

Texipol 63-425 is a next generation inverse emulsion synthetic thickener based on a significant proportion of bio-derived content. It shows broad pH compatibility and imparts pseudoplastic rheology to aqueous compositions and is supplied as a pre-neutralised dispersion as the sodium salt of an acrylic based polymer.

Brand: Texipol (10 products)

Technical Data Sheet

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Chemical Family
Acrylics & Acrylates
Fillers Included
Calcium Carbonate
Polymer Name
Thermoset Polyester
CASE Ingredients Functions
Rheology Modifier,
Thickener
Composite Materials Functions
Resins, Binders & Matrix Materials
Technologies
CASE Ingredients,
Composite Materials
Product Families
CASE Ingredients — Additives
Rheology Modifiers & Stabilizers
Composite Materials — Polymers & Resins
Thermoset Resins

Features & Benefits

CASE Ingredients Features
Low Viscosity,
Pseudoplastic Rheology

Applications & Uses

Markets
Consumer Goods
Applications
Consumer Goods — Sports & Recreation
Adhesive & Sealant End Applications
Waterborne Adhesive
Coating End Applications
Waterborne Coating
Composites Processing Methods
Casting
Applications
  • TEXIPOL® 63-425 is supplied as an easy to use, low viscosity liquid that gives almost instantaneous thickening when mixed directly into aqueous formulations. The polymer is already neutralized so there is no need to adjust the pH to activate.
  • TEXIPOL® 63-425 has been used to thicken various water- based adhesives and coating systems where it gives an exceptional creamy consistency. Typical thickener dosages are 0.5-2.0%, though this is system dependent and higher paste viscosities may require higher addition levels.
  • Scott Bader Texipol 63-425 Applications

Properties

Physical Form
Liquid
Appearance
Creamy liquid
Characteristics
ValueUnitsTest Method / Conditions
Specific Gravity (at 25°C)1.13--
Inverse Emulsion Viscosity*27.5dPa.s-
Thickened Deionised Water (3%)min. 350dPa.s-
Polymer ChargeAnionic--
Note

*Deionised water thickened with 3% of Texipol® 63-425 as supplied. Brookfield RVT, Spindle 6, 5 rpm at 25°C.

Packaging & Availability

Packaging Type
Drums,
Totes (IBC)
Packaging

TEXIPOL® 63-425 is available in drums and IBCs (please check with your local representative).

Storage & Handling

Storage

TEXIPOL® 63-425 should be stored between 5 and 30°C in the original, unopened container in a dry, well ventilated place. Protect from freezing and direct sunlight.